Метка: GN

GN Big Bowl Centrifuge for Waste Water Treatment Projects

Comparing with the most commonly used 14 inch decanter centrifuges, the GNLW452 and GNLW453 Decanter Centrifuges of 18 inch bowl and GNLW553 decanter centrifuge of 22 inch bowl are already called big bowl centrifuges. In this case, the newly on show GNLW764A-VFD Decanter Centrifuge could be a giant centrifuge, because the bowl diameter is 30 inch while the length-diameter ratio is 4.4 to one.

This design is suitable for handling the large capacity with a single unit of centrifuge. And the special design and best material chosen makes the GNLW764 decanter centrifuge to have a good performance and longer service life.
Besides GNLW764A-VFD decanter centrifuge, GN also has designed GNLW554D-VFD decanter centrifuge, which is also of large length diameter ratio up to 4, it is quite suitable for the waste water treatment projects.
Just like all of GN high standard decanter centrifuges, GNLW764 and GNLW554 decanter centrifuge share all following features:

GN BIG BOWL CENTRIFUGE
GN BIG BOWL CENTRIFUGE OF 30 INCH

1. Electric components are of Siemens, ABB or Schneider, all of world best brands.
2. For the VFD control panels, GN provide positive pressurized control panel and has air conditioning system for cooling as option.
3. Bowl main body material is made of duplex stainless steel SS2205.
4. Impeller protection is with tungsten carbide tiles, for longer service life and easier keeping the dynamic balancing.
5. Solids discharge port is made of special ceramic or tungsten carbide inserts, to have a longer service life.
6. Flexible adjustable liquid level ponds, to change the drying level of treated material.

Also, for the CIPPE 2017 which was held in Beijing, GN Solids Control also showed the fully hydraulic decanter centrifuge, of 14 inch bowl diameter. It is preferred by some clients from extremely high temperature condition and where the electric power is limited.

GN decanter centrifuges are widely used for drilling rig solids control system, the drilling waste management system, for the dewatering system, for TBM project separation works, and also for the oily sludge separation projects and soil remediation projects.
If you have any question or need more information, please fell free to contact GN sales team directly or visit GN factory near Beijing, Capital of China.

GN High Speed Decanter Centrifuge Used for Waste Water Separation

As more and more GNLW series decanter centrifuges are using in oil and gas drilling and drilling waste management systems, GN Solids Control sometimes are regarded as a professional centrifuge manufacturer, and some clients are using GN centrifuge in other industries as sludge separation, waste water separation and other applications.

GN Decanter Centrifuge
GN Decanter Centrifuge

Comparing with drilling waste management systems, the separation of waste water need the centrifuge to work at a comparably lower differential speed, which is also the speed for conveying the solids phase in the bowl.
Why? Why not a high differential speed?
1. First of all, a high speed for conveying the material may mix the liquid and the solids, and the whole centrifuge would be working as a mud agitator, in this case, the centrifuge is not an efficient separation equipment.
2. Secondly, in order to treat the waste water, the end user need to add some chemical into the material, to change the size or the chemical composition of the waste water. In condition of a high differential speed, the useful chemicals may be discharged together with the liquid at the liquid outlet.
3. Thirdly, when there is chemicals in the material to be treated, and the centrifuge’s differential speed is high, there would be quite much of bubbles and foams. It would give negative affect on the separation result.

GNLW363CG-VFD is an idea choice for the waste water separation projects, because this is the highest standard decanter centrifuge internationally, GN uses best material for the decanter centrifuge bowl as SS2205 which is more strong and more anti-corrosive.
And for the control panel, GN has positive pressurized control panel for easily choose the suitable bowl speed and differential speed. When the aimed bowl speed and differential speed are entered into the PLC control panel, the program will calculate out a suitable back motor speed automatically.
May you need more information, pls contact GN Solids Control.