Solids Control transportation and handling

For ensure safety, handling Solids Control should be balanced. before transportation you must adopt two same rope which is hung on the fore hangers. No handling with a rope to prevent any unnecessary shock and turning over.

Solids Control equipment is fixed by fore long bolts on a supporting rack at ex-factory. For ensure safety should be tie up or separated during transportation.

Solids Control should be mounted at suitable location discharged sand easily above No.2 mud tank. The sands outlet should be located outside mud tank where the solids may be easily moved to proper disposal location. The discharge sand slide should be set at a steep angle to prevent a solids buildup.

If you have trouble, you need to provide solutions case, please contact us.

   

 

drilling mud system where possible Program with regard to HARD DISK DRIVE

Dirt Cleansing Program, mud system Dirt Recycling where possible Program, dirt systemPosted through Sophia Zhao GN like a top produce with regard to solids manage tools within The far east, providing strong manage gear primarily with regard to essential oil drilling dirt blood circulation sytem or even HARD DISK DRIVE dirt recycling where possible program until right now.

500GPM drilling mud system  where possible program produced through GN

Tools within the dirt recycling where possible programInside a dirt recycling where possible program, you will see various tools along with various specifications with respect to the complete dealing with capability. The actual mainlly tools such as shale shaker, dirt solution or even desander desilter, submersible slurry pump motor, give food to pump motor with regard to dirt solution, dirt container along with other accessories.

The actual set up dirt recycling where possible program within manufacturing plant

The actual bellow image is really a 200GPM dirt recycling where possible program within GN manufacturing plant, the actual mailly tools is actually shale shaker as well as desilter as well as dirt container.know more 

contact  here : http://www.gnsolidsamerica.com/contact.html

GN Get Decanter Centrifuge

GN usually recommand the actual Decanter Centrifuge since the get pump motor. GN SY sequence submersible pump motor is actually organised associated with solitary phase as well as solitary stroking along with cantilever, Decanter Centrifuge is actually associated with semi-unshrouded impeller along with mixing vane outfitted in the prolonged area associated with impeller  vane. The primary features from the Decanter Centrifuge tend to be how the Decanter Centrifuge base below drinking water offers sufficient stiffness, along with showing not really outfitted in between impeller as well as Decanter Centrifuge entire body. With showing encapsulation not really used, it may express moderate that contains strong particle along with larger focus.For more information about us, please visit our official website: http://www.gnsolidsamerica.com/decanter-centrifuge.html

GN Decanter Centrifuge may be exported to many nations each within solitary device or even connected within the total program. Any kind of query or even require turned on, simply really feel liberated to postal mail all of us.

 

GN Oilfield Decanter Centrifuge & Vertical Centrifuges

Oilfield  Decanter Centrifuges

The GN Decanter Centrifuge is design to separate the untra-fine solids from the drilling fluids, combined with dewatering unit (Flocculation), it gives user clean fluids for discharge.GN Decanter centrifuge also can be used for Barite Recovery.

 GN Decanter Centrifuge Features & Benefits

  1. High G Force up to 3000 G for different applications.
  2. 316 Stainless Steel Bowl, Screw and Collection Box for more difficult situations.
  3. Different Capacity available from 50GPM to 500 GPM for more industry.
  4. Speed adjustable by VFD or Mechanical change.
  5. Screw protected by Tungsten Carbide Tiles.
  6. Solids Discharge port protected by Tungsten Carbide Ring.
  7. SKF or FAG Bearing for longer life.
  8. Explosion proof for Class I Division I.

2)     Oilfield Vertical Centrifuges

The GN Oilfield Vertical Centrifuges is designed to reduce and recover base fluid from a variety of feed slurries. The GN VCD Normally can reach the performance of the Oil On the Cutting(OOC) to to be 3% to 5%.

Features & Benefits  of GN Oilfield Vertical Centrifuges

  1. GN Oilfield Vertical Centrifuges Reduce the amount of OBM or SBM on cuttings discharge to reduce waste volume and/or meet environmental objectives.
  2. GN Oilfield Vertical Centrifuges Recover valuable base fluids for re-use.
  3. Reduce fluid content prior to other treatment, thereby increasing process capacity.
  4. High G Force up to 420 G for dryer solids, more recover of valuable drilling fluids.
  5. GN Oilfield Vertical Centrifuges Big Volume for 30 ~ 50 Tons/H for more applications
  6. Stainless Steel Screen with Opening  250/350/500 microns for flexible option.
  7. GN Oilfield Vertical Centrifuges Adjustable and replaceable Flights easy for maintenance.
  8. Individual Oil Lubrication system ensures reliable operation.
  9. All major rotation parts is balanced individually, for easy interchangeable and long life.

For other GN Oilfield Vertical Centrifuges products features and more details, please refer to our company products brochure.

Desilter description come from gnsolidsamerica

Flush the desilter drilling equipment according to item 4.2.4 when start-up it after a long time idle. Drum must begin running when main driving motor’s speed reaches 80~90% of its full speed, otherwise stop the motor immediately. Check if the oil level of the coupler correct, or any obstruction exists in the drum. Service oil temperature can’t exceed 90°C when the coupler run continuously. The melting temperature of the meltable plug in the coupler is 125°C. If the oil temperature exceed 125°C because of overload, fusible alloy in the meltable plug is melt , the oil in it spays out , at this time, Desilter must be stopped at once. Supply oil as above mentioned. Replace the meltable plug with another one of the same specification. Caution: Don’t replace the meltable plug with solid bolt. After using, flush the drum and inner cavity . Caution: When you flush the underflow nozzle of drum’s small end, never strentch your fingers into the hole because screw propeller may be still running even though the drum has stopped rotating, fingers may be cut off!! Mud filling speed should below 40m3/h, otherwise, it is easy to cause overload in charged mud and then make the shear pin to be cut or clutch slips. In non-charged mud, liquid phase may flow away from the underflow opening, cause waste. Separating effect will decrease when mud viscosity at inlet opening exceed 38 seconds. Fill amount of water in to dilute and decrease funnel viscosity below 35 seconds. Operation personnel should check and see bearing holder’s temperature on two ends, differential temperature and sand discharging condition. If discharged sand is thin slurry which can flow continuously and automatically, it means that the separating effect is the best, and with light load, this is very important for prolonging the life of the centrifuge. If discharged sand is lump and come out discontinuously, at the same time, it looks very dry. It means that mud with too much sand and centrifuge’s load is too heavy, adequate split-flow should be done. Otherwise, it will lead to main motor’s stoppage because of overload or main bearing and differential’s temperature rising. In another word, main bearing or differential’s temperature rising(main bearing’s temperature exceed 70°C, differential’s exceed 50°C) indicate that mud has too much sand and split-flow should be done,Drain off remained liquid in the drum when stopping the centrifuge in winter and rescrew the bolt after the liquid is drain off(the bolt is at the big end of drum).