GN Vertical Cuttings Dryers and Decanter Centrifuges Working for SINOPEC Soon

Not long ago, 3 sets of GNCD930C vertical cuttings dryers
and 3 sets of GNLW363 decanter centrifuges were
transported to Shandong Province, and soon they will be working at SINOPEC
jobsite there like a complete set of waste management system.

SINOPEC, CNPC and COSL are 3 Oil giants in
China, which are no doubt also ranked among the TOP 100 international Oil
Companies. They are national owned companies. As a private owned company, it’s
not easy for GN Solids Control to get big projects orders from them without a
high standard quality. But GN made it, not only once. In fact, every year, GN
Solids Control has got large orders directly from the oil giants both in
domestic China and outside China. Besides this, GN
Solids Control’s solids control systems, waste management systems and
other equipments are working with rig packages or so for the oil giants’
service companies, like Baker Hudges, who is working at Nabors’ jobsite with 4
sets of GN Waste Management Systems.

Talking about Baker Hudges, before year
2014, they seldom purchased solids control or waste management equipment from China,
but they paid an eye to Chinese manufacturers for a while. In year 2014, when
they considered to buy from China, they sent engineers from their Headquarter
of USA, visiting and inspecting all the main solids control manufacturers in
China, and finally chose GN Solids Control as the supplier. Before their
equipments dispatched from factory, their engineers also come to inspect. Now
the waste management systems are performing satisfying in their extremely cold
jobsite.

And such systems are working well at many
places, like in South America, in Middle East, in Africa and in China main
land. Single equipments are more, to more than 60 countries and regions. Below
are some links for jobsite working video for your more information.

The main equipment in the system like
centrifuge, has more than one application, you could check it on page of
centrifuge. And in case of WBM only, you can also change the vertical cuttings
dryer into a High-G shaker to save cost.

Wide Range of Applications of GNLW363 Centrifuge Decanting

The working principle of decanter
centrifuge is by different centrifugal force comes from the different
size of material separated by centrifugal forces generated by high speed
rotation. There are 2 phase centrifuges and 3 phase centrifuges. Depending on
the industries, there are centrifuges for food industry, for oil and gas
industry and for cement industry and etc.

In field of oil and gas, the centrifuge
decanters are divided into several different but related fields, including oil
and gas solids control, drilling cuttings waste management
and zero discharge dewatering unit. Among all sizes of oil and gas centrifuge
decanters, there most popular and practical and economic size is 14 inch bowl
diameter and 51 inch long decanter centrifuge, with a high rotating speed up to
3200RMP.

GNLW363 decanter centrifuge now is in its 3rd
generation, the new product has combined a lot of new designs and the feedback
suggestions from the end user all over the world. In case of VFD controlled
models, it could be used at a middle speed as a solids control centrifuge for
recover the barites and at a high speed as a waste management decanter
centrifuge and dewatering centrifuge when treating out the fine solids. Even in
case of fixed speed, such applications could be met easily by using the back up
pulley and belt at 2 extra speeds, optional at 1800RPM, 2200 RPM and 2700 RPM. For
both fixed speed GNLW363 and VFD control panel GNLW363, there are 2 optional
models of economic one and premium one for you to choose from, depending on
your budget and jobsite condition.

Besides the GNLW363 decanter centrifuge,
there are also other models of centrifuges manufactured by GN Solids Control,
including the big bowl single motor centrifuge GNLW452, middle speed centrifuge
especially for barite recovery in solids control system, and GNLW453 and
GNLW553 big bowl VFD controlled decanter centrifuge with a large treating
capacity, and also, GNLW223 baby centrifuge, mostly for mining and diamond drilling,
and sometimes for TBM slurry units’ further separation.

6 more sets Upgrated Drilling Waste Management Equipment to the Site

After present all the tech. details,
project list, showed client all the on site media, pictures, videos, the client
finally choose GN Solids Control. Now we are winning more and more chance to
cooperate with all the contractors who cares about quality same as they care
about money. As good quality will save money eventually.

Recently, 3 sets drilling cuttings
management equipment was sent to Sichuan, China; http://bit.ly/scDWM-02 

http://gnsolidscontrol.com/images/2015-News/cuttings-drying-shaker.jpg 

3 Sets Vertical Cuttings Dryer and High
Speed Centrifuge sent to Shangdong Sinopec. http://bit.ly/Sinopec-01 

http://www.gnsolids.com/uploadfile/2015/0407/20150407080306414.jpg 

For the recent two projects, one is
using verticle cuttings dryer and decanter centrifuge, another is using Hi-G
dryer shaker and decanter centrifuge. The GNZS594HGE-LD
high G force linear motion drying shaker has been widely used all over the world
in many drilling waste management companies because of it’s adjustable High G
force up to 8.0 G, and the reliable performance. For cuttings dryer, to avoid
the blocking of the inside located screen, this 4th generation dryer unit is
equipped with air knife system that can blow the screen timely. Besides, the
dryer unit has a flushing system which could ensure the timely cleaning of the
inside of the bowl. The water pipe is outter connected for easy operation. With
the rapid rotation before turning offer the machine, the water pumped in could
flush every corner inside the dryer. The customers could choose to use GN’s
flushing pump or their existing unit.

GNLW363CG-VFD
centrifuge is that the premium centrifuge created by GN, this model
is one in all the foremost widespread size within the market. In 2014, GN
Solids management oversubscribed over one hundred fifty centrifuges of this
model to the globe market. It’s market share area unit growing, since GN is
that the one to produce international prime customary product with efficient
solutions. And additional significantly, we have a tendency to perceive the
sturdiness is incredibly vital for consumer term and long run investment. The
sturdy product create GN consumer to repeat the orders unceasingly.

Features and Benefits:

1. Solids discharge port block ring
forestall the solids accumulating on the gathering box, that save time for
cleanup and shield the plow and bolts effectively.

2. Solids discharge direction same with
the suspension feeding direction ensures the treating capability and avoid the
solids staying within the propellor and to become dry which is able to result
in issue for cleanup.

3. Adding gap on propellor create to
reduces the liquid resistance and liquid discharge fluently.

4. Liquid discharge port plate
adjustable with additional correct scales maximally meets the operators’
demands on treating results.

High Configuration 500GPM Mud Systems for HDD Rigs

Among all the fields that GN Solids Control
is professional in, HDD Rig’s mud recycling systems or
units are one of the most important and specialist one. Since its establishment
years ago, GN has been providing large HDD contractors in and out of China.
Now, like the largest HDD project contractor in China, CPP, is a long-term
client of GN Solids Control, at beginning of this year, CPP signed order to GN
Solids Control, with 8 sets of 500 GPM mud recycling system, with the highest
configuration.

Each year, GN will produce tens of such
systems, mostly for clients from market abroad, like Australia, Thailand,
Singapore, India, Kuwait, and some countries in Africa. GN has a series of
mature products of mud recycling systems for HDD, with most popular treating
capacity as 200 GPM, 350 GPM and 500 GPM. Of those, 500 GPM systems are most
frequently used in China.

For the same capacity systems, 500 GPM, GN
has different configurations for option, both economic configuration and
premium configuration available.

The most difference between the economic
configuration and premium configuration is the treating equipments. This time,
for the order of CPP, it is the premium configuration, with shale shaker, desander cones with under shaker, desilter cones with under
shaker and 2 sets of decanter centrifuges. For a normally economic
configuration, there is some times a mud cleaner which is combined by a mud shale shaker, a desander and a
desilter, and in most cases there is no centrifuge. And when more treating
equipments are used, there will be larger surface for them, accordingly, the
storage capacity is enlarged.

In case of Piling work or TBM projects, the
mud system, or so called slurry plant is simpler. Normally the slurry for such
projects is not requested to be treated so fine, so there is no need for
desilter cones, only to choose enough desander cones according to the desired
treating capacity. And for Piling mud systems, there is no mixing facilities.

If you need any consultancy in this field,
welcome to contact us freely.

Related Arciels:

Used 14inch bowl decanter centrifuge for sale

GN solids America has
a used 14inch
bowl decanter centrifuge for sale in our
Houston warehouse, the address is 6710 windfern road, Houston, TX 77040,
welcome to drop by our warehouse and check it.  

The specification of
the centrifuge is as below:

Decanter centrifuge
bow diameter: 14 inch

Bowl length: 50 inch

Effective treating
capacity: 132gpm at drilling fluids, but the treating capacity will varies at
different density & viscosity drilling fluids

Max bowl speed
3900rpm and normal working bowl speed is 3200rpm

The separation cut
point is 2~5 microns

Max G force up to
3063.

The electrical
control panel is IEC explosion proof standard which comply with US oilfield
standard.

The centrifuge is for
3 month rental only, now we will sell it with good discount, welcome to contact
our sales for price offer.

Features of the
centrifuge:

1 bowl material made
of duplex stainless steel 2205 and the other parts are made of SS316L

2
Screw conveyor is protected by tungsten carbide tiles

3 Screw flow
distribution port is protected by tungsten alloy

4 SKF bearing for
longer service life

Application of GN
stocked centrifuge:

1 Solids control
system, low gravity solids

2 Drilling cuttings
waste management, worked together with GNCD930
vertical cuttings dryer

3 Waste water
treatment

4 dewatering system

GN can provide low
speed pulley to use it for high gravity solids and barite recovery. We can also
provide telescopic skid to put the centrifuge on for convenient operation, the
feeding pump is optional.

We have another 3
sets of same model centrifuges for rent in the States, the specification is
equivalent to Derrick DE1000 / Swaco 518 / NOV Brandt
HS3400. We will show GNLW363 series decanter centrifuge at OTC
2015 oil show,we have 2 stands at
OTC, welcome to visit our booth at:

Reliant Arena Booth A
(290SF) No.: 9225-2  – Hebei GN Solids Control Co.,Ltd
Reliant Arena Booth B (200SF) No.: 6137        –
GN Solids America LLC

Related Arciels: