http://www.mudcentrifuge.com/

GN Solids Control Equipments Sailing for Russia

It has been years since GN
products became popular among Russian companies, especially for Drilling
companies and oilfield service companies. Not long ago, there are a lot of solids control equipments shipped
to Russian for a drilling rig’s complete solids control line, including shale
shakers, mud cleaner and decanter centrifuges of middle speed and high
speed, the vacuum
degasser, and feeding pumps for desander and desilter
cones for the mud cleaner, the feeding pumps for the decanter centrifuges and
also, the mud mixers and mud guns.

In fact, ever since GN Solids
Control was established years ago, the foreign market has been occupying a
large share of GN Solids Control’s market share. Not only the Russian spoken
countries, but also the Middle East, the Asian countries, the South American
countries and the high standard market including the European countries and
Australia, GN Solids Control has been their first choice among all Chinese
brands.

Why not other brands come from
USA or Europe?

GN Solids Control has been
providing the solids control industry with its high standard international standard
products. GN always believes in Quality first, price second. After becoming the
first API certified solids control manufacturer in China, GN Solids Control has
been certified by HSE, ISO, DNV CE and many other certificates internationally. GN Solids American is
the first USA based solids control company from China, and before the establish
of GN US branch, GN’s products have been accepted by US and Canadian clients
and have been competing with them in their local market. Until now, GN’s
products have been exported to more than 60 countries and regions in the world.

Why choose GN among all Chinese
suppliers in this field?

Of course, quality and reliability
are always most important factors when the end users choose the brand or
supplier. GN Solids Control has a good reputation during the years, and clients
mostly come from introduction by old clients. There is an old Chinese saying
that seeing is believing, at any time, welcome to visit and inspect GN factory
and office near to Beijing airport, the capital of China.

Dredging Slurry Separation System

It is very strange that China even
have more strict environmental requirement on the dredging field than all over
the world, on the waste solids disposal and also the fluid dump, no matter
how it have been applied on field, in paper it is really advanced. So
basically when the oil market is down, we get a chance there, some client
in dredging field said. Just like you have done in drilling
waste management field. Also we have realised that not
only china all over the world, people are taking more care on the
environmental protection. For dredging, what we need is: Recycle the cleaner fluids.

Dump and reuse as much as possible on
the solids.

Not like the oil gas drilling, from the
pond, or from the river, from sea, there are sands, rocks, and other
things as you can imagine which have been buried in it. So
the separation seems very different. Except the basic concepts.

Separate the biggest particles and
other stuff other than the sands and silts. There are many ways to do this, one
is dig another pit / pond, with at big screen from where dredging pump
feeds, let the screen separate unreasonable parts to the pond, keep them away
from the progress. Another way is gumbo box, it is quite same as
the mining applications, to separate the biggest rocks from the first
step, then others feeding directly to the shale
shaker.

Then directly, or by another pump from the
pond. The feeding goes to the double deck shaker. In GN Solids Control , it is GNZS706E,
which is good to separate the bigger sands and the most of
the bigger solids. going through two sieves.

Catched by the pump, feeding to the
cyclones, to get the silts separated.

Then in the same way, separated by the
decanter centrifuge.

Sometimes it also need help from chemicals
that why a flocculent unit is there. To concentric the small particles
to be bigger ones, then easier to be separated.

Kindly contact GN for a full solution.

GN solids control tell you what is a mud gun ?

As a liading muaufacturer with regard to
drilling mud solids control & waste management devices such as mud gun,
straight cutting, screw conveyor, shale shaker, screw pump, mud cleaner,
oilfield shale shaker,
desander and desilter, machine degasser, decanter centrifuge, very poor boy
degasser, mud agitator,
mud tank, shear pump,
etc . Our own product served in around 60 countries, with organizations or
partner in Ough. S., Russia, Auatralia, Latina America and Middle Far east.
GN drilling fluid mud gun is a device familiar with agitate drilling mud with a
drilling rig. More of a nozzle than a gun, a mud gun is connected to a new pump
to circulate the going mud and prevent the solids from settling in the mud tank. also depending on
the quantity being used and the pit measurement. They are best used in tank
corners to keep solids through settling and a mud agitator is placed in the
tank heart.

GN premium quality mud gun is considered to be one of the longest prolonged on
the market today. Drilling mud can be a wet substance that is similar to a
thick clay and is also used to cool the exercise head and carry typically the
remnants of drilling for the surface in water properly drilling and oil as well
as gas drilling operations. GN mission mud gun is really a inexpensive solution
to a likely expensive problem. Mud is done by mixing water or even oil with a
clay-like ingredient that also contains several other chemicals into a big tank
called the mud tank on a drilling rig.
GN mud gun is a 360˚ rotating swivel body, plus the ability to be
customized to the length, flanged or threaded.
Replacement parts for GN mud guns can be ordered by GN Solids Control Company.,
Ltd. GN is a fprofessional solids control system manufactuer in china. Any
problem i highly recommend you contract us on the web:
http://gnsolidscontrol.co

GN Total Solution for drilling waste management

GN Solids Control is the first Tiongkok
drilling waste management gear company who can offer full solution for drilling
waste management Service Company.

Regarding Oil-based mud drilling cuttings, the entire solution of drilling
waste management including below methods:
Step 1: Vertical
cuttings dryer. Use this VG dryer to take care of the drilling cuttings,
get the valuable oil based soil. The OOC after cure can be 3%-5%.
Step 2: Energy Desorption Unit. After VG dryer, the solids can TDU for
nonhazardous ultimate treatment. After TDU, this inflatable water, oil and
solids may be separated in accepted level which comply with most of country’s
government policy on enviromentally friendly protection
Step 3: Decanter
Centrifuge. After VG dryer, typically the liquid part (drilling fluids) can
go to centrifuge to remove often the fine solids and get back to active mud
tank regarding reuse. Some client allow liquid part discharged via VG dryer go
back to lively mud tank
system immediately. This is also OK.

Regarding normal water based mud drilling clippings, the total solution of drilling
waste management including down below steps:
Step 1: High Grams drying shaker ( HG dryer). Use this HG dryer to treat the
drilling waste, recover the valuable drinking water based mud for using again.
The mud on waste after treatment can be all-around 10%.
Step 2: Solidification product. After HG dryer, the actual solids part can be
put straight into solidification unit to blending with cement or chemical
substances to get nonhazardous treatment.
Step: Decanter Centrifuge. After HG dryer, the liquid aspect (drilling fluids)
can go to centrifuge to remove the fine solid waste and go back to active
magnetic tank for reuse. A few client let the liquid portion discharged from HG
dryer go back to active mud container system directly. This is also ALL RIGHT.
GN Solids Control will be the
first solids control devices supplier with China basic & USA base and
Russia base from China. All of our equipment is working in over 70 countries
and areas, increasing good reputation from many purchasers.

GN Fixation Unit for Drilling Waste Management

GN Solids Control is complete line drilling waste
management solution provider, related equipment like vertical cuttings
dryer, High G dryer, cuttings fixation unit, thermal desorption unit etc.
Different countries have different regulations on the treatment of drilling
waste discharged from shale shaker & mud cleaner &
centrifuge.

Like client in Nigeria, most of land rig
oil drilling company do like this:

1)
Use one set vertical
cuttings dryer + one set decanter centrifuge at rigsite. During drilling
period, the drilling waste discharged from shaker will go to vertical cuttings
dryer for recycle and reuse. The discharge solids from vertical dryer will be
collected by cuttings skips. The drilling fluids will go to centrifuge to
remove fine solids and then, go back to active mud tank for reuse.

2)
The cuttings skips for vertical
dryer, cuttings skips for mud cleaner and cuttings skips for centrifuge will be
taken to mud factory which have thermal desorption unit for final treatment.

3)
Vertical cuttings dryer is
mostly used in oil based mud drilling waste management. If for water based mud
drilling cuttings treatment, high G shaker is mostly
used. Because of lower environmental containment of WBM, high G dryer is very
lower cost than vertical cuttings dryer.

Like client from Algeria / Gabon, they like
to use cuttings fixation unit for final treatment at rigsite. They transfer the
drilling waste into the fixation unit, with curing agent.

Except for the drilling waste management
equipment, GN Solids Control also produces large quantity of solids control
equipment. Each year, we provide over 250 sets shale shaker & mud cleaner
& desander &
desilter; over 150 sets decanter centrifuge; over 400 sets centrifugal pump
& shear pump & submersible slurry pump & screw pump.

We can also offer complete line of solids
control mud system for oil & gas drilling big drilling rigs; compact small
mud system for HDD small rigs/ water water small rigs etc. For clients with
similar requirement, pls contact us freely.