GN Containerized Drilling Cuttings Treatment System and Shale Shakers for Russia

This week GN shipped one set of containerized drilling cuttings treatment system and several units of shale shaker to Russia. This is not the first containerized drilling cuttings treatment system sold to Russia, because of the low temperature in Russia area, the client do not want to stop operation in the long winter, this customized design is to keep the drilling fluids warm and prevent it from get frozen.


The containerized drilling cuttings treatment system including one unit of vertical G dryer with fluids collection tank, one mud agitator installed on top of the collection tank. The centrifuge feeding pump transfer the mud from fluids collection tank to the decanter centrifuge to separate more solids from the fluids, the final discharged solids can be reused for the drilling rig or used to prepare for new drilling fluids. The solids discharged from the vertical G dryer is with OOC < 5% like powder, they will be transferred by the screw conveyor to the cuttings box outside the container. One unit of 4kw screw pump is used as flashing pump of the vertical G dryer. The whole drilling cuttings system treating capacity is 40m3/h for oil based drilling cuttings, the decanter centrifuge with VFD control panel can be used to separate the fine solids from the fluids, the separation cut point is 2~5 microns.


The client also ordered several units of GNZS594 shale shaker with 4 panel composite material frame shaker screens, the screen size is 585x1165mm, the total screen area is 2.73m2, the G force is high up to 7.5G.


继续阅读“GN Containerized Drilling Cuttings Treatment System and Shale Shakers for Russia”

GN Solids Control will Exhibit at 2018 OTC in Houston USA

After participation in the CIPPE 2018 in Beijing, China from 27th to 29th March, 2018, GN solids control will participate in OTC 2018 in Houston , TX. For more information of CIPPE 2018, pls check : http://www.gnsolidscontrol.com/drilling-fluids/welcome-to-gn-booth-for-the-2018-cippe-beijing-oil-show


We welcome you to visit GN at CIPPE 2018 in Beijing and visit GN factory where is 30km from the exhibition center during the oil exhibition.
OTC 2018 general information: for more information, pls visit their website: http://2018.otcnet.org/
Show Time & Location: 30 April – 3 May, 2018. NRG Park, Houston, Texas, USA
Booth No. 1: NRG Center 1369-1 (GN China)
Booth No. 2: NRG Arena 8000 (GN America)
What equipments will GN show at OTC？


Decanter centrifuge GNLW363C, this is the best sold model decanter centrifuge among all the decanter centrifuge models.
Shale shaker: GNZS594F-HB, we have many sets of shale shaker and mud cleaner in stock in Houston warehouse for immediate shipment, we install Martin brand vibration motor made in USA and assembly in our warehouse.
Sludge Vacuum pump:GNSP-20A, this is our new products in 2018, we have sold GNSP-40A vacuum pump for drilling cuttings transfer and dredging slurry transfer for dredging slurry separation system, sometimes the vacuum pump may not be suitable to transfer the oil sludge based on the sludge density and viscosity and the depth. GNSP-10A & GNSP-20A vacuum pump is the new designed model to meet the client’s requirement for smaller treating capacity.


Mud cleaner: GNZS594E-2S12N
Centrifugal pump, the installation dimension, outer dimension and spare parts are all interchangeable with Mission Magnum centrifugal pump.

继续阅读“GN Solids Control will Exhibit at 2018 OTC in Houston USA”

2 units of drilling cuttings transfer vacuum pump to South America

This week GN solids control shipped 2 units of drilling cuttings transfer vacuum pump to Argentina, this is used together with 2 sets of drilling waste management system shipped in May, 2017. The client also bought 4 sets of cuttings screw conveyor to transfer the drilling cuttings.


Both of the cuttings vacuum pump and screw conveyor can be used to transfer the drilling cuttings to the vertical cutting dryer, also called vertical G dryer. The discharged solids from vertical cuttings dryer with OOC < 5%, the discharged fluids are transferred to the decanter centrifuge by screw pump. The vertical cuttings dryer and decanter centrifuge are the major equipments for drilling waste management system.
How to install the vacuum pump in the jobsite besides the vertical cuttings dryer?
The vacuum pump can replace the screw conveyor when the fluids content is higher in the drilling cuttings, GN will provide chargable material collection hopper to install on the top inlet of the vertical cuttings dryer. The vacuum pump will suck the drilling cuttings/ oil sludge from the waste pit with hose, the discharge line is also connect with the vertical cuttings dryer inlet top.
When the solids content is higher in the drilling cuttings, the client will use 2 sets of screw conveyor, one set is installed horizontally to collect the drilling cuttings from the solids control system, the other set is installed inslantly with less than 45 degree angle from the underground. The 2nd screw conveyor will transfer the drilling cuttings to vertical G dryer. Pls check the working video of the vacuum pump to transfer drilling cuttings or oil sludge from GN solids control wedsite.
http://www.gnsolidscontrol.com/video/gn-drilling-cuttings-or-sludge-vacuum-transfer-pump-working-video
继续阅读“2 units of drilling cuttings transfer vacuum pump to South America”

Happy 2018 Chinese New Year—from GN solids control

GN solids control wish you and your families happy 2018 Chinese New Year, our holiday starts from Feb. 12th, 2018 to Feb. 25th, 2018, we will back to work on Feb. 26th, welcome to send us your inquiries during the holiday, our sales engineer will response at the earliest convenience. We appreciate your support during the past years, and we wish a longer term cooperation in the year of 2018.
The workers will stop working during the holiday and enjoy their time with families, but our sales will still hard working during the holiday to provide you immediate response.
During the past years, the best sold products are as below:


1) Shaker screens: The composite material frame shaker screens are very popular among international drilling companies in the world in the past years, we almost sold all the stocks and even can not meet the requirement of our clients. Especially for the OEM shaker screens for GNZS703, GNZS594E shale shaker, replacement shaker screens for Swaco Mongoose PT, Brandt King Cobra shaker, Venom, VSM 300 scalping shaker screens and primary shaker screens, FSI, MD-3, etc. screens.
2) Linear motion shale shaker and high G drying shaker: GN brand shale shaker has been widely used for oil & gas drilling solids control system, HDD & CBM mud recycling system, water based drilling waste management system.


3) Decanter centrifuge: GN 14inch bowl , 18 inch bowl, 22 inch bowl decanter centrifuge has been used for oil sludge treatment system, drilling waste management system, dewatering unit, solids control system, etc.
继续阅读“Happy 2018 Chinese New Year—from GN solids control”

400BBL Mud Tank System for Australia Drilling Company

This week GN Solids Control shipped 400bbl mud tank system to Australia drilling company. The configuration of the 400bbl mud tank system is as below:

1) 2 mud tanks, dimension: 12000x2800x1500mm, each tank with 200bbl tank volume, the stairs are outside of the mud tank to promise the largest tank volume.
Mud agitators are installed on top of the mud tank to prevent solids sedimentation.

2) 2 units of GNZS703F-HB linear motion shale shaker, installed with GN OEM composite material frame shaker screens, which is durable longer working life and larger effective screens area for better separation performance, the screens are with GN unique design locking system and the composite material frame make it stocked for over 5 years without getting rusted.
Normally we will package the shaker screens and wedges separately and bond on the shale shaker to avoid it get rusted during sea transportation.

3) Single skid amounted jet mud mixer and connect with the 2 mud tanks, it can mix the drilling fluids from any compartment of the 2 mud tanks except for the sand trap. Oilfield skid mounted design to promise the largest tank volume and easy maintenance. Separate control panel are installed on the skid to control the mixing pump.
4) All of the above equipments are IEC ex and the electrical cable, control panel, glands, etc comply with Australia explosion proof standard.

继续阅读“400BBL Mud Tank System for Australia Drilling Company”