GN Company supplies Decanter Centrifuge for Worldwide Clients

GN Company has been a professional manufacturer of Decanter Centrifuge for 13 years. GN Company has three factories in China Mainland, and one 100% owned subsidiary in Moscow, and one 100% owned subsidiary + warehouse in Houston, with total sales amount in 2020 more than 10 million US dollars, and more than 70% is from International Market, and supplying to more than 65 countries.

GN Company can manufacture decanter centrifuge with bowl size from 220 to 760mm, which can reach clients’ requirement of different capacity. GN decanter centrifuge bowl length/diameter ration is over 4.2. The material touch part is made of duplex stainless steel by centrifugal casting, which is better than stainless steel 316 or 304. All the bearings are from international reputable brand. The solids discharge port and slurry distributing port are all protected by tungsten carbide inserts, which can increase working hours of the decanter. The liquid pond depth is flexible to adjust based on different feeding inlet.

The control cabinet for decanter centrifuge is made of stainless steel, with protection level IP55. If there is requirement of explosion proof, GN Company can supply both ATEX and IEC cabinet. And the main motor and back-up motor of Decanter Centrifuge can also be explosion proof. And GN Company can supply motor based on clients’ vendor list.

Besides supplies Decanter Centrifuge, GN Company also manufactures Sludge Feeding Pump, Screw Conveyor, Polymer Preparation Unit, Tank, etc.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company Supplied Decanter Centrifuge for Wastewater Treatment in Europe

GN Company is a professional manufacturer of Decanter Centrifuge for about 10 years, with capability of 1~2m3 per hour to 120m3 per hour. GN Company can supply the whole unit of Decanter Centrifuge with Explosion proof standard which is acceptable by European clients, including Motor and Electrical Control Panel. For example, ATEX Explosion Proof, Zone 2 is available. And CE Certification for GN Decanter is also available.

GN Company can install One Vibration Sensor and Two Bearing Temperature Sensors for each unit of Decanter Centrifuge, which can help clients to watch out the safety of the Decanter, as well as performance. GN Company can supply the Gasket with material of Viton. GN Technical Engineers can also install Automatic Lubrication Unit for Decanter, which can also be Explosion proof standard, which is acceptable by European client. The Control Panel of Decanter is made of stainless steel, with protection level IP55.

GN Company would provide 5 meters of cables between the decanter and the control cabinet, and clients can order if they need, and they can also find from hardware stores in local market.

GN Technical Engineers would supply complete connection diagrams and PLC diagrams, for easy integration with clients’ control system after order.

GN Company would offer complete User Manual, and On-line Support is also available. The Decanter Centrifuge would be delivered as one complete unit, and there is no more assemble work in your place

Welcome to contact GN Sales Managers, and they would offer One Stop Turnkey Solution for clients’ projects.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company Supplied Decanter Centrifuge for European Client

GN Company has been a professional manufacturer of Decanter Centrifuge for over 10 years, with capacity of manufacturing decanter centrifuge with bowl size from 220mm~760mm. And treatment capacity can be ranged from 1~2cubic meters per hour to 120 cubic meters per hour.

GN Company was established in 2007, and now has 3 factories in China Mainland (including 2 factories under operation and the third one would come into operation by the end of 2021) and 2 branch companies (100% owned) in Houston and Moscow separately. GN Company has totally employees about 200, with colleague educated more than 50%. Now GN Company has supplied Centrifuges with more than 200 sets each year.

Now GN Company has supplied equipment to about 70 countries, including but not limited to UK, Norway, Russia, France, Germany, Spain, Portugal, Turnkey, UAE, Oman, Iraq, Bahrain, India, Mongolia, Malaysia, Vietnam, Philippine, Singapore, Indonesia, Nigeria, Egypt, South Africa, Canada, USA, Mexico, Brazil, Argentina, Peru, etc.

Decanter Centrifuge can be widely used for environment field, such as wastewater/sewage treatment, mining & construction, such as tailing/hydrovac mud, food & beverage, and chemical industry, etc.

Besides supplying Decanter, GN Company can also manufacture & supply the other supporting equipment, such as Progressive Cavity Pump (professional sludge feeding pump for Decanter), Screw Conveyor (transfer the dewatered dry sludge discharged from decanter), polymer preparation & dosing system, pretreatment vibrating screen, and tank, supporting pipelines, etc.

Welcome to contact GN Sales Managers, and they would offer one stop turnkey solution based on clients’ specific project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co., Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

Solids Vacuum Pump for Transferring Dry Sand

Client from Europe ordered one unit of Solids Vacuum Pump from GN Company, and the Pump would be used to transfer dry sand in his construction job site.

GN Company has developed 3 models of Vacuum Pump, with different capacities, including 10, 20, 40 m3 per hour. The Pump can be used to transfer solids with size maximum 50mm, based on its inlet/outlet size. The suction distance can reach 50 meters in horizontal, and suction depth can reach 8 meters. The discharge distance can be 1000 meters maximum in horizontal, and lift/discharge height can reach 80 meters maximum. (This is calculated based on clean water, and it might reduce some during actual work)

Two of the small models of Vacuum Pump are movable with wheel, and the biggest model is skid-mounted.

Vacuum Pump is totally 100% air operation/driven, and itself not cost of electricity or diesel. The air is always supplied by air compressor. Air Compressor can be electrical driven or diesel driven. And the pump is much less maintenance than common pump, and clients find hoses easily in local hardware store.

It is available to arrange pump trial test with clients’ sample within GN factories, and clients can check the pump performance during actual operation.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ requirement.

Here are the applications of the Vacuum Pump can work on
Slurry, Sludge removal and transfer
Mud and tailings transfer
Pit and Sump cleaning
Oil sludge, tank bottoms residual removal and transfer
Barge tank and silo transfer of material
Sand; course, fine, conventioal and frac sand
Diatomaceous earth
Hazardous waste removal with close circuit transfer
Animal waste
Transfers virtually any material

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

Sludge Vacuum Pump for European Client

Client from Africa ordered one unit of Sludge Vacuum Pump, and the Pump would be used for oily sludge cleaning in the crude oil production site.

GN Company is professional manufacturer of Vacuum Pump, and the Pump can be widely used to transfer sludge, soil, sand, powder, slurry, mud, water, etc.

Please find the pump working video from linkage as below.

https://www.youtube.com/watch?v=OuUWPKmtVr0

GN Company Technical Team now has developed 3 models of Vacuum Pump, with different capacities, including 10m3 per hour, 20m3 per hour, and 40m3 per hour (the capacity is calculated based on clean water, and it might reduce some during actual work for clients’ project). The maximum suction distance can reach 500 meters in horizontal, and suction depth can be 8 meters. The maximum discharge distance can reach 1000meters in horizontal, and discharge height can reach 80 meters.

The pump is 100% air driven, and itself no need electricity or diesel, therefore without concern about explosion proof in dangerous environment, such as refinery plant.

The Vacuum of the Pump is created by the principle of venture, and air is always supplied Air Compressor. GN Company focus on manufacturing vacuum pump only, and we can also supply Air Compressor based on clients’ project requirement, thus we can deliver a whole package. Generally we suggest clients to find air compressor in local market, and that can save their purchase cost and shipment cost as well.

Welcome to contact GN Sales Managers, and they would detail solution based on clients’ requirement.

It is also acceptable to arrange trial test with clients’ sample by GN Vacuum Pump within GN Company’s factories, and clients can check the pump performance during actual operation.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)