GN disc stack separator

GN disc stack separator 

Recently, GN has competed the manufacturing of two units 3-Phase disc stack separator, and will be arrange to send to the overseas clients as soon as possible.

Due to its high running speed and centrifugal separation factor, as usual, disc separator is used to separate two miscible liquid phase with small density contrast or as a clarification equipment to remove the fine solid particles from the liquid.

In this order, the model of the disc stack separator selected by the clients is GNSD225, with a piston diameter of 730mm, The slag discharge action of the sliding piston is automatically controlled by a PLC fully automatic control cabinet specially designed with safety protection devices.the rotation speed of 4500RPM, We make of duplex stainless steel 2507, which is the higher quality, the control cabinet with touch screen and PLC, operators can monitor and operate the equipment. We also equipment with a series of sensors that can detect the speed, vibration and temperature of key components of the device.

In addition to 3-phase disc stack separator, GN Separation can also provide two-phase decanter centrifuges and three-phase decanter centrifuges. For more information on centrifugal separators, please feel free to contact GN Separation at any tim

GN sludge vacuum pump

GN solid vacuum pump is fully pneumatic conveying equipment, It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging. Most of the solids, sludge and liquid could be transferred by using this pump. With special structure design of no rotating parts in the cavity, it can be used at tough environmental with high working performance and less maintenance.

The Capable of producing powerful suction up to 85Kpa(25 inHg). Discharge head and distance is large, clear water theoretical discharge height of 80 meters, horizontal distance is around 500 meters.

Sludge vacuum pump can be used for transport or removal Liquid with high solid content, oil sludge with high viscosity, can also be used for cleaning Handle bulk solid materials, including sand, dust, etc.

Air operation, no need electric power, suitable for hazardous area application.

Transferred solids size Maximum 50mm or 75mm, sludge solids content up to 80%.

Get more details of GN sludge vacuum pump, please feel free to contact GN.

 

Ecomondo — The Green Technology Expo

GN separation is very glad to inform that we will participate Ecomondo- The Green Technology Expo held in Rimini. Ecomondo is one of the most important envorimentual and sustainable exhibition in Italy.

The Ecomondo will be held in 7th to 10th November, lasting about 4 days. Ecomodo provide a platform for professionals and business worldwide to exchange, collaborate.

Ecomondo — The Green Technology Expo

Venue: Rimini Expo Centre, Italy
GN Booth: B7, 414

This time, GN will bring decanter centrifuge, solid vacuum pump and dewater screw press in Ramini.

GN decanter centrifuge can complete basic separation process such as solid-phase dewatering and liquid pahse clarification. The 3-phase decanter centrifuge can achieve solid-liquid-liquid separation. GN decanter centrifuge has shown excellent performance in the treatment of industiral wastewater, municipal, wastewater and oily sludge and other fileds, according to the different hourly capacity, we have some different model for your choose.

GN solid vacuum pump is fully pneumatic device that can handle various forms of waste, including liquid, slurries, powders, particles, viscous substance, etc. It is widely used in fields such as municipal sludge wastewater treatment.

Dewater screw press, it’s a kind of economic and environmental friendly sludge dewatering equipment. It is a new type of sludge extrusion dewatering equipment by using the principle of screw extrusion.

GN look forwrad to communicate with more professional clients at the Ecomondo exhibition. We wish to establish  connections with customers, partners to jonintly promote the development environmental protection.

 

 

 

 

 

Ecomondo the Green Technology Expo In Rimini

Ecomondo the Green Technology Expo will be grandly held from 7th to 10th November at Rimini expo center in Italy. The exhibition aims to showcase new technologies and equipment in solid-liquid separation in the wastewater recovery and environmental industry .

As a processional equipment manufacturer, GN separation will appear at Ecomondo Green Technology Expo with booth No. B7,414 to show decanter centrifuge, solid vacuum pump and dewater screw press.

At this exihibition, GN will show the following equipment

  1. GNLW224FT-VFD. It’s the smallest model of decanter centrifuge which we have, with bowl diameter 220mm(9 inch), the max bowl speed is 5054RPM, we adopt SUS2205 or SUS 2304 (Duplex Stainless Steel) Centrifugal Casting, in order to reduce wear and make lifespan a little longer.
  2. GNSP10B solid vacuum pump, it’s 100% pneumatic driving, need to connect a compressor for work, it can be safely used in flammable and explosive places.
  3. GNHDL14SY Mini dewater screw press, it’s widely used in sewage treatment projects of municipal, aquaculture, food, starch, oil, pharmaceutical, chemical, paper, leather and other industries.

GN Separation is looking forward to meeting new and old customers at the exhibition.

Clarifying Decanter Centrifuge

Since its beginnings, GN has designed, developed and produced different kinds of centrifuges for  solid/liquid and liquid/liquid separation.

GN clarifying decanter centrifuge is C series decanter centrifuge with beach angle of 20 degree. It suits for material of small particle size, low density difference between solids and liquid, moderate viscosity, moderate concentration.

 

Model GNLW-224EC GNLW-364EC GNLW-454EC GNLW-554EC GNLW_654EC GNLW-764EC
Bowl Diameter 220 mm
(9 Inch)
360 mm
(14 Inch)
450 mm
(18 Inch)
550 mm
(22 Inch)
650 mm
(25.6 Inch)
760 mm
(30 Inch)
Bowl Length 924 mm
(36.4 Inch)
1512 mm
(59.5 Inch)
1890 mm
(74.5 Inch)
2310 mm
(91 Inch)
2730 mm
(82 Inch)
3328 mm
(131 Inch)
Bowl Speed 5600 RPM 4600 RPM 4000 RPM 3500 RPM 3200 RPM 2800 RPM
Max G Force 3863 G 4265 G 4032 G 3773 G 3670 G 3336 G
L/D Ration 4.2 4.2 4.2 4.2 4.2 4.4
Main Motor 11 KW 22/30 KW 37/45 KW 55 KW 90/110 KW 110/132 KW
Back Motor 5.5 KW 7.5 KW 11/15/18.5 KW 15/18.5 KW 18.5/22/30KW 22/30/37 KW
Beach Angle 20°
Drive Type VFD+PLC+ HMI
Bowl Material SUS2304(Duplex Stainless Steel)/ SUS2205(Duplex Stainless Steel) Centrifugal Casting
Screw Material SUS2304(Duplex Stainless Steel)/SUS2205(Duplex Stainless Steel)
Remarks
The P-Series,Y-Series,C-Series decanter are interchangeable by replacing bowl assembly.

Final specifications should be based on commercial and technical offer.

Customized materials of the decanter centrifuge are available for option.

 

                The above specification and parameters for reference only.

 

 

 

2023.09.01 Decanter Centrifuge

The beach angle of the C series clarifying decanter centrifuge is 20 degree, so the bowl cone section is short, and the straight section of the bowl is longer, it will give the bowl to have a longer clarifying section.

 

The rotating part of these decanter tricanter centrifuges is mounted on a compact, in-line frame, with main bearings at both ends. Vibration dampers are placed under the frame. The rotating part is enclosed in a casing with a cover and a bottom section with integrated outlets for both solids and the liquid being removed.

2023.09.27 decanter centrifuge VFD control panel

Clarifying decanters are designed for the continuous separation of suspensions into solids and clarified liquid, it widely used for Food, Beverage, Edible Oil separation processing and transfer solutions .

For more information about GN Clarifying decanter centrifuge, please feel free to contact us at any time.