vacuum pump | GN Decanter Centrifuge

Overview about Centrifuge’s Applications and Selection

Compared with other separation equipment, Centrifuge can be used not only to get low moisture solid phase and high purity liquid phase, but also it has advantages of small footprint, good sealing, continuous operation, and automatic remote control, etc. So Centrifuge is widely used in chemical, petrochemical, petroleum refining, medicine, food, textile, metallurgy, coal, shipbuilding, environmental protection, military industry, and others. Such as purification and reuse of drilling mud for petroleum, sludge concentration and dehydration for sewage treatment, refining of petrochemical products, extraction of antibiotics and pesticides, production of milk, yeast, beer, fruit juice, sugar, orange oil, animal and vegetable oil, and fabric fiber dehydration, production of starch and other food, fabric fiber dehydration, purification of lubricants and fuel oil, etc. Centrifuge has become widely used separation equipment for different industries of the national economy.

20200229 Big Bowl Decanter Centrifuge

There are different processing requirement in the production process, including Dehydration, Clarification, Concentration, Classification, and Separation. The essence of Dehydration and Clarification is to separate solids and liquid in the suspension, Dehydration is to remove liquid phase from solid phase, and Clarification is to remove solid phase from liquid. Concentration is to increase the content of solid phase in the solid-liquid mixture. Classification is the separation of particles of different size in the suspension. Separation generally refers to the separation of two mutually incompatible liquid phases.

GN Separation & Conveying Company is professional separation equipment, including
2 Phase Decanter Centrifuge
3 Phase Decanter Centrifuge
2 Phase Disc Separator
3 Phase Disc Separator
Sludge Solids Transferring Pump
Screw Conveyor, etc

20200229 Big Bowl Decanter Centrifuge (2)

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN COMPANY SUPPLIED SLUDGE SOLID VACUUM PUMP FOR INDIAN CLIENT

Indian client ordered one unit of GNSP-20B Vacuum Pump from GN Company, and it would be shipped before the Chinese New Year Holiday. That pump can be used for transferring Sludge, Powder, High Solid Content Sludge, High Density/Viscosity Sludge, Slurry, Water, etc.

GN Company has supplied this pump to ship repairing/maintenance plant, for suction the small iron powder, to olive oil processing plant, for transferring active carbon, to environment protection Company, for transferring oily sludge, and to Construction Company, for transferring waste construction solids……

20200112 SolidsVacuumPump2

The horizontal suction distance can be 50~100 meters, and discharge distance can be 500~1000 meters. Vertical suction depth can be 8 meters, and lift/head can reach 80 meters. (capacity calculated based on clean water)

There is no cost of Electricity or Diesel for GN Vacuum Pump, and it is 100% air operation. The air source from Air Compressor is suggested, which is always available in the majority of factories.

20191215 Solids-Vacuum-Pump-4

GN Company has been focus on manufacturing Pump for about 13 years, including Sludge Solid Vacuum Pump, Centrifugal Pump (100% Interchangeable with NOV Mission Magnum), Screw Pump, Submersible Slurry Pump, etc.

GN Company has been supplying Equipment to about 80 countries, including Europe, Africa, Middle East, Russia, Southeast Asia, North and South America, Asia, with 70% sales are from International Market.

GN Company has two factories now under operation now, and the third factory would come into operation in 2020, with total size about 100,000 square meters.

GN Company head office & factories are all in China, one hour from the Beijing International Airport by car.

GN Company has two branch companies, including one in Moscow, the other one in Houston.

Welcome to contact GN Sales Managers, and visit GN Company.

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Company attended IE EXPO CHINA 2019 in Shanghai

GN Conveying & Separation Company attended IE EXPO CHINA 2019 dated on April 15~17th, 2019, at Shanghai New International Expo Center.

This is Asian’s leading environmental show, with covering all the high potential markets in environmental area as below,
Water/Waste Water and Sewage Treatment
Waste Management
Site Remediation
Air Pollution Control and Air Purification

GN Company is a professional manufacturer of Waste Water & Oil Sludge Treatment System (removing Solids and Water, and collecting Clean Oil for reuse) for 11 years, including,

Decanter Centrifuge (widely used for Solid Liquid Separation, Mud/Sludge De-watering)
Solids/Sludge Vacuum Pump (widely used for Sludge, Solids, Slurry Transferring & Conveying)
Oil Water Separator
Tank Cleaning System
Mud Agitator
Screw Conveyor, etc.

Now GN Company has three factories, about one hour from the Beijing International Airport by car, with more than 100,000 square meters totally, and supplying equipment to about 76 countries.

Besides GN Company, all the other Chinese main environmental protection engineering companies and service companies also participated in the exhibition.

GN showed three devices for this exhibition as below,

1. Decanter Centrifuge (GNLW224E & GNLW363)
2. Sludge/Solids Vacuum Pump (GNSP-40 & GNSP-20)
3. Centrifugal Sand Pump

Welcome to contact GN Company for more Technical Specifications & Working Video of our equipment.

It is acceptable to post sample to our factories for testing and checking.

Vacuum Pump for Sludge/Solids/Mud Transferring/Conveying

GN Solids Control attended CIPPE Beijing exhibition show from March. 27th~29th, 2019, and our Hot Sale Vacuum Pump received big attention among the visitors, and many people came to our exhibition booth for consulting more information about this pump.

GN Sludge Vacuum Pump is widely used for Waste Mud/Solids transferring, waste pit and tank/well bottom cleaning, animal waste cleaning, and bed silt cleaning, etc.

Features
100% Air Operation
Safest in the industry
NO internal workings/moving parts
Fixed or mobile system
Generates 25”hg vacuum
One-man Operation
Reverse Vacuum

GN Company has developed Three Models based on clients’ requirement as below,

GNSP-40B, with Max Capacity 40 m3/h.
GNSP-20B, with Max Capacity 20 m3/h.
GNSP-10B, with Max Capacity 10 m3/h.

GN Vacuum Pump is a type of Pneumatic Pump, with sucking material by vacuum (negative pressure), while Vacuum Degree can be 85Kpa/25 inch HG, then discharging by positive pressure supplied by air compressor.

Horizontal suction distance can be 50 m, and discharge distance can be 500 m~1000 m, with maximum solids content can be 80%, and maximum solids size 50~75 mm. The Air demand ranges from 4.3~17 m3/min & 80~114 PSI.

Welcome to contact GN Company for more technical specifications & working video.

The Biggest Three Petroleum, Oil & Gas Events/Exhibition

CIPPE (China International Petroleum & Petrochemical Technology and Equipment Exhibition), OTC (The Offshore Technology Conference), and SPE Offshore Europe (OE) are the three biggest Petroleum Oil & Gas Exhibitions.
The CIPPE is the biggest Petroleum Show in Asia, an annual exhibition of petroleum and petrochemical industry, with exhibition space about 90,000 sqm, 1,800 exhibitors and over 117,000 professional visitors from 65 countries, including USA, Germany, UK, France, Canada, Italy, Russia, Korea etc.

CIPPE received great support from domestic oil giants such as CNPC, Sinopec Oil Engineering Machinery Company, CNOOC, while some global reputable enterprises also participated in the exhibition.

GN Solids Control attended the CIPPE Beijing Show from March 27th~29th, 2019, and displayed our full product line-up, including Decanter Centrifuge, Shale Shaker, Screen, Pump (Centrifuge Pump & Vacuum Pump), Oil Sludge Treatment System, etc.

Decanter Centrifuge is mainly used for Solids and Liquid Separation, including the items as below,

Dewatering sludge/mud and suspensions
Thickening sludge or mud
Clarifying different type liquids
Classifying solids in a wet suspension by grain size
Separation of solids according to various densities

GN Decanter Centrifuge can be widely used for Drilling Mud Solids Control, HDD, TBM, Bored Piling, Mining Industry, Food and Beverage Industries.

GN Oil Sludge Treatment System can be widely used for waste oil sludge/sand from Raw Oil Tank, Refinery Plant, Drilling Site.

The treatment process is mainly as follow, firstly heating and chemical washing the oil sludge, secondly removing big size of solid by shale shaker, thirdly removing fine solids by decanter centrifuge, and fourthly separating water and oil.

The oil recovered from oil sludge can be sold to the refinery plant, as solid & water content in the oil is less than 3%.

Welcome to contact GN Company for more detailed information & working video.