Рубрика: Uncategorized

GN Supplied 2 Units of Drilling Cuttings Management Systems for Chinese Client

Recently GN Company finished production of 2 units of Drilling Cuttings Management Systems for Xinjiang, China client, and would arrange shipment to client’s work site soon.

The Drilling Cuttings Management System is used for recovering drilling fluids from drilling cuttings as much as possible for reuse, which can save cost and protect environment.

There are two kinds of Drilling Cuttings, Oil based drilling cuttings and Water based drilling cuttings.

For oil based drilling cuttings, GN Company’s System can reduce the oil on the cuttings to 3%-5%.
For water based drilling cuttings, GN Company’s System can reduce moisture content for easy transportation.

This Xinjiang client ordered Oil Based Drilling Cuttings Treatment System. Oil Based Drilling Cuttings Treatment System includes two parts, cuttings drying module and fine solids removing module.

Cuttings Drying Module, its key equipment is Vertical Cuttings Dryer. Its working procedure is feeding Drilling Cuttings into Vertical Cuttings Dryer, then separating oil from cuttings, and passing through the screen opening to the collection groove inside the dryer unit, it is achieved by centrifugal force.
Opening size of the dryer screen is designed of 250, 350 and 500 microns as options for different size cuttings drying. And vertical cuttings dryer is equipped with flushing system and air knife system for cleaning of the mud collection groove and screen, in order to avoid block.

Fine Solids Removing Module, its key equipment is decanter centrifuge. The liquid effluence discharged from the cutting dryer would be pumped into decanter centrifuge for polishing treatment to remove the fine solids in drilling fluids. GN Company can manufacture decanter centrifuge from 9 inch (220mm) ~ 30 inch (760mm), with bowl length and diameter ration up to 4.2, and adjustable G force up to 3000G, for reaching client’s requirement in different projects.

Welcome to contact GN Company for technical specifications and work site reference.

GN Company Attend 2019 OTC Exhibition

The Offshore Technology Conference (OTC) was founded in 1969, it tends to be the world’s most important exhibition event in Oil Drilling, Development, Production, Environmental Protection, etc, with support of 12 professional industry organizations such as the American Petroleum Institute.

The OTC is the largest oil industry event in the world. It attracted 2,000 exhibitors from 47 countries, and 101,500 visitors from 141 countries around the world in 2018, with a total exhibition area of 697,800 square feet, and exhibition criteria as below,
Petroleum machinery equipment
Oilfield chemicals
Instrumentation,
Technical Services, etc.

GN Solids Control Co., Ltd is a professional manufacturer of separation equipment for 11 years, including solids control equipment and waste management equipment, with supplying equipment to about 76 countries, including Middle East, Canada, Australia, USA, Russia, China, etc.

GN Company attended the OTC exhibition in 2019, and showed Decanter Centrifuge, Sludge/Solids Vacuum Pump, Mud Shaker, Centrifugal Sand Pump, etc.

Decanter Centrifuge can be widely used for Wastewater & Sewage Treatment, Mud/Sludge Dewatering, Oil Sludge Treatment and recovering, etc.

Sludge/Solids Vacuum Pump can be widely used for Solids, Slurry, Powder transferring. 100% pneumatic driven vacuum pump, and can be widely used for different industries, such as mining, construction, and petrochemical.

Welcome to contact GN Company for consulting exact solution for your project, as we can offer One Stop Turnkey Solution for Waste Water Treatment, Solid Liquid Separation, Oil Sludge Treatment, etc.

GN Company Supplied Automatic Tank Cleaning System for South American Market

Recently GN Company finished production of One Unit of Tank Cleaning System for client from South American.

GNTC-30C Automatic Tank Cleaning System is used for cleaning Mud Tank, Oil Tank, Chemical Tank, etc. Its working procedure is to transfer cleaning water to High Pressure Tank Cleaning Machine mounted on the tank, and Integrated Pump would pump waste water back into Tank Cleaning System for filtration & Separation. Then the clean water after treatment would go back to the system for reuse.

Tanking Cleaning System Detailed Procedure is as below,

  1. High Pressure Centrifugal pump (8) pump clean water from Buffer tank (7) and supply to tank cleaning machine(2) to clean the mud tank.
  2. Suction Pump (2) suck dirty wash water from mud tank through the strainer (1) which will filter the coarse solids.
  3. The suction pump (2) will feed dirty water through the static mixer to inclined plate clarifier (5).
  4. The chemical dosing system (3) will supply chemical/flocculants to the static mixer (4) to mix with the dirty water to enhance the separation in the IPC.
  5. The inclined plate clarifier (5) will separate settable solids.
  6. The clean water from IPC (5) will overflow to buffer tank (7).
  7. The buffer tank level control system will control the pumps automatically.
  8. Membrane Pump (6) will take the settable slurry from the IPC (5) to Skip.

Welcome to contact GN Company for Technical Specifications & Working Vedio.

Small Order But Big Amount Business-Centrifugal/Sand Pump Spare Parts

As Pump Users/Engineer know that the Pump actually are assembled by many different small parts, including Motor, Bearing, Seal, Spring, Shaft, Packing Set…… The end user may purchase the Pump by different channels, such as Shop, Distributor, Trading Company, or Shopping on line, and these parts are from different manufacturers or bands. Somehow it is always a big headache for the end users to find available spare parts for replacement.

GN Solids Control Company is professional pump manufacturer for 11 years, including Centrifugal Pump, Sludge Pump, Screw Pump and Submersible Pump.

Today we would like to offer the detailed information about our HOT SALE pump—Centrifugal Pump.

 

  1. All spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily
  2. Thick, Strong Concentric casing provides extended life over conventional volute designs. The Concentric design minimizes turbulence and abrasive wear.
  3. Pump casing made from hard ductile iron alloy, increased abrasion resistant capability compared to competitors pump.
  4. Wide open-vane impeller creates lower axial thrust for improved bearing life.
  5. Pump impeller made from hard ductile iron alloy, extended life over competitors design.
  6. Anti-loosening impeller lock bolt to eliminate pump damage in case of improper motor hook-up.
  7. High quality no-adjustment mechanical seal to provide zero leakage and longer operation life.
  8. Replaceable shaft sleeve prevents shaft wear.
  9. All bearings from top brand for reliable operation.
  10. The skid for supporting pump and motor is made from casting instead of welding to provide reliable operation and less vibration in a result to extend the pump and motor life.

Attention: All GN Centrifugal Pump Spare Parts are 100% interchangeable with the most of the international Brand pump which helps customer to source spare parts easily. 

How to deal with the Water and Sludge after Flood?

One week ago, an Indian friend shared me some pictures and videos for the Flood in their country, and the terrible situation after Flood. The streets were full of sludge, and many parts of the city were still full or water.

It shall be a big headache for the local government to deal with the environment, besides the homeless people.

We, GN, a professional Chinese pump manufacturer for 11 years, we have two models of pump could be widely used to remove the sludge and water after flood.

The Centrifugal Pump and Sludge Vacuum Pump.

Today we would like to share detailed information about Sludge Vacuum Pump, the GN Hot Sale Pump!

VACUUM PUMP

 

Sludge Vacuum Pump

Waste vacuum pump, also named as solids transfer pump. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance.
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid,  slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids  transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high  density, solids content max. up to 80%.

GN Sludge Vacuum Pump Parameter

Model GNSP-40A GNSP-20A GNSP-10A
Max Capacity(m³/h) 40m³/h 20m³/h 10m³/h
Inlet/Outlet Size(Inch) 4” 3”
Vacuum Degree 25”HG (Mercury Column) 85Kpa/25 inch HG（Mercury Column）
Max Suction Distance(m) 50m
Max Discharge Distance(m) 1000m 500m
Max Solids Content 80%
Max Solids Size(mm) 75mm 50mm
Pressure Request 550Kpa-785Kpa (80-114PSI) 550Kpa-690Kpa (80-100PSI)
Air Demand 17m³/min (600CFM) 8m³/min(280CFM) 4.3 m³/min(150CFM)
Weight(kg) 875kg 320kg 290kg
Dimension:L×W×H(mm) 1690×1400×1989mm 1357×916×1253mm 1317×806×1273mm

Material transfer applications

  • Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
  • Drilling mud transfer
  • Waste pit cleaning
  • Hazardous waste recovery
  • Oil sludge, tank bottoms residual removal and transfer
  • Barge holdings and vessel bottom clean out
  • Bulk tank and silo transfer of material
  • Sand; Course, fine, conventional and frac sand
  • Diatomaceous earth
  • Animal waste etc.

Welcome to contact us, if you need more information.

We would share the Pump working video for it works powerfully.