Solids Vacuum Pump for Transferring Dry Sand

Client from Europe ordered one unit of Solids Vacuum Pump from GN Company, and the Pump would be used to transfer dry sand in his construction job site.

GN Company has developed 3 models of Vacuum Pump, with different capacities, including 10, 20, 40 m3 per hour. The Pump can be used to transfer solids with size maximum 50mm, based on its inlet/outlet size. The suction distance can reach 50 meters in horizontal, and suction depth can reach 8 meters. The discharge distance can be 1000 meters maximum in horizontal, and lift/discharge height can reach 80 meters maximum. (This is calculated based on clean water, and it might reduce some during actual work)

Two of the small models of Vacuum Pump are movable with wheel, and the biggest model is skid-mounted.

Vacuum Pump is totally 100% air operation/driven, and itself not cost of electricity or diesel. The air is always supplied by air compressor. Air Compressor can be electrical driven or diesel driven. And the pump is much less maintenance than common pump, and clients find hoses easily in local hardware store.

It is available to arrange pump trial test with clients’ sample within GN factories, and clients can check the pump performance during actual operation.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ requirement.

Here are the applications of the Vacuum Pump can work on
Slurry, Sludge removal and transfer
Mud and tailings transfer
Pit and Sump cleaning
Oil sludge, tank bottoms residual removal and transfer
Barge tank and silo transfer of material
Sand; course, fine, conventioal and frac sand
Diatomaceous earth
Hazardous waste removal with close circuit transfer
Animal waste
Transfers virtually any material

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

Sludge Vacuum Pump for European Client

Client from Africa ordered one unit of Sludge Vacuum Pump, and the Pump would be used for oily sludge cleaning in the crude oil production site.

GN Company is professional manufacturer of Vacuum Pump, and the Pump can be widely used to transfer sludge, soil, sand, powder, slurry, mud, water, etc.

Please find the pump working video from linkage as below.

https://www.youtube.com/watch?v=OuUWPKmtVr0

GN Company Technical Team now has developed 3 models of Vacuum Pump, with different capacities, including 10m3 per hour, 20m3 per hour, and 40m3 per hour (the capacity is calculated based on clean water, and it might reduce some during actual work for clients’ project). The maximum suction distance can reach 500 meters in horizontal, and suction depth can be 8 meters. The maximum discharge distance can reach 1000meters in horizontal, and discharge height can reach 80 meters.

The pump is 100% air driven, and itself no need electricity or diesel, therefore without concern about explosion proof in dangerous environment, such as refinery plant.

The Vacuum of the Pump is created by the principle of venture, and air is always supplied Air Compressor. GN Company focus on manufacturing vacuum pump only, and we can also supply Air Compressor based on clients’ project requirement, thus we can deliver a whole package. Generally we suggest clients to find air compressor in local market, and that can save their purchase cost and shipment cost as well.

Welcome to contact GN Sales Managers, and they would detail solution based on clients’ requirement.

It is also acceptable to arrange trial test with clients’ sample by GN Vacuum Pump within GN Company’s factories, and clients can check the pump performance during actual operation.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

Solids Vacuum Pump for European Client

GN Company completed production of 2 units Solids Vacuum Pumps and shipped out last week. The Pump would be used for slurry transferring in a mine.

The Pump can be used to transfer sludge, solids, powder, sand, soil, slurry, and mixture. Please find the pump working video on YouTube, linkage as below.

It is 100% air operation/driven, and there is not cost of electricity or diesel itself. The air for the Pump is generally supplied by Air Compressor, and GN Company suggests clients to find air compressor in local market, which can save purchase and shipment cost.

The Pump is working continuously, and both suction and discharge are adjustable within 0~30 seconds. The vacuum of the Pump is created by venture, when the vacuum/negative pressure is created in the Pump, the slurry would be sucked into the pump body. After the pump cavity is full or it reaches the set time of suction, the Pump would come into discharge mode, where the air would be fed again in the pump via different air pipe, in order to push the slurry out of the cavity. When it reaches the set time of discharge, the Pump would begin suction again. That is the Pump working mode/circle.

GN Company now has developed 3 models of capacity, including 10m3/hour, 20m3/hour, and 40m3/hour. And for different models of Pump, the required air pressure and air amount is different, and welcome to contact GN Sales Managers for the details.

GN Company now has supplied the Pump to clients in UK, Norway, Portugal, Syria, Greece, UAE, Oman, Bahrain, Saudi Arabia, Nigeria, Egypt, India, Malaysia, Indonesia, Mongolia, Canada, etc.

Welcome to contact GN Sales Managers, and they would offer specified solution based on clients’ projects.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Supplied Solids Vacuum Pump for European Client

Client from Europe ordered one unit of Solids Vacuum Pump, and it would be used to transfer chemical powder in their chemical processing factory.

GN Company is a professional manufacturer of Solid Liquid Separation & Conveying Equipment, and Solids Vacuum Pump is one of the hottest-sale conveying equipment. Because it has much more application than common pump, as it can be used to transfer solids, powder, sand, soil, slurry, sludge, water, and their mixture.

Please find the pump working video from linkage as below (YouTube).

www.youtube.com/watch?v=OuUWPKmtVr0

The suction depth can be 8 meters, discharge head can reach 80 meters, and horizontal suction distance can be 50 meter, and discharge distance can reach 1000 meters maximum. (Attn. the distance is all calculated based on Clean Water, and its actual performance during work depends on clients’ specific project)

And clients don’t need to worry about its safety in dangerous environment, because the Pump is 100% air operated/driven, and doesn’t cost electricity/diesel. And GN Engineers suggest Air Compressor to supply air for Pump. Generally GN Company suggests clients to find Air Compressor in local market, in order to save purchase and shipment cost, while GN Company also has reliable supplier of air compressor manufacture, and can deliver pump with air compressor as a complete set.

Welcome to post sample to GN factories, and GN Engineers would arrange actual trial test with clients’ sample by the Pump, and share video to clients.

Till now, GN Company has already supplied the Pump to clients in Norway, UK, Greece, Portugal, France, Serbia, Canada, Mexico, Brazil, UAE, Oman, Bahrain, Mongolia, Malaysia, Singapore, Brunei, Nigeria, Egypt, etc.

Welcome to contact GN Sales Managers, and they would offer professional service for clients’ specific project requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)