作者： gnadmin

Happy 2018 Chinese New Year—from GN solids control

GN solids control wish you and your families happy 2018 Chinese New Year, our holiday starts from Feb. 12th, 2018 to Feb. 25th, 2018, we will back to work on Feb. 26th, welcome to send us your inquiries during the holiday, our sales engineer will response at the earliest convenience. We appreciate your support during the past years, and we wish a longer term cooperation in the year of 2018.
The workers will stop working during the holiday and enjoy their time with families, but our sales will still hard working during the holiday to provide you immediate response.
During the past years, the best sold products are as below:


1) Shaker screens: The composite material frame shaker screens are very popular among international drilling companies in the world in the past years, we almost sold all the stocks and even can not meet the requirement of our clients. Especially for the OEM shaker screens for GNZS703, GNZS594E shale shaker, replacement shaker screens for Swaco Mongoose PT, Brandt King Cobra shaker, Venom, VSM 300 scalping shaker screens and primary shaker screens, FSI, MD-3, etc. screens.
2) Linear motion shale shaker and high G drying shaker: GN brand shale shaker has been widely used for oil & gas drilling solids control system, HDD & CBM mud recycling system, water based drilling waste management system.


3) Decanter centrifuge: GN 14inch bowl , 18 inch bowl, 22 inch bowl decanter centrifuge has been used for oil sludge treatment system, drilling waste management system, dewatering unit, solids control system, etc.
继续阅读“Happy 2018 Chinese New Year—from GN solids control”

400BBL Mud Tank System for Australia Drilling Company

This week GN Solids Control shipped 400bbl mud tank system to Australia drilling company. The configuration of the 400bbl mud tank system is as below:

1) 2 mud tanks, dimension: 12000x2800x1500mm, each tank with 200bbl tank volume, the stairs are outside of the mud tank to promise the largest tank volume.
Mud agitators are installed on top of the mud tank to prevent solids sedimentation.

2) 2 units of GNZS703F-HB linear motion shale shaker, installed with GN OEM composite material frame shaker screens, which is durable longer working life and larger effective screens area for better separation performance, the screens are with GN unique design locking system and the composite material frame make it stocked for over 5 years without getting rusted.
Normally we will package the shaker screens and wedges separately and bond on the shale shaker to avoid it get rusted during sea transportation.

3) Single skid amounted jet mud mixer and connect with the 2 mud tanks, it can mix the drilling fluids from any compartment of the 2 mud tanks except for the sand trap. Oilfield skid mounted design to promise the largest tank volume and easy maintenance. Separate control panel are installed on the skid to control the mixing pump.
4) All of the above equipments are IEC ex and the electrical cable, control panel, glands, etc comply with Australia explosion proof standard.

继续阅读“400BBL Mud Tank System for Australia Drilling Company”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.


GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.
GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


继续阅读“Meet Good manufacturer of decanter centrifuge at CIPPE 2018”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.
GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.


GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


继续阅读“Meet Good manufacturer of decanter centrifuge at CIPPE 2018”

Mud Recycling Tank system for HDD

Lately,
we have one overseas customers requiring one sets 500gpm mud recycling tank
system for HDD project. The client is GN old client who made the purchase set
500gpm system three years before. Now, they need much more equipment to support
the forthcoming new projects. Based on the previous mud system, the customers
give request on the specialized parameters

Part 1: Reuse unit:
Same layout being a original unit – shale
shaker , shaker with desnader and desilter, 2x pumps for
cyclone and 1x feed transfer pump
Delete the actual mud hopper
Size of 40ft container with locking gadget for track
Recycle device will be 7. 5m size and rest of the length is drilling to be flat
skid for attach in Generator
Unit should have lifting hooks for motorised hoist
Feed hose entrance through pit and clean mud hose needs to be at the foundation
floor height – device is drilling to be mounting permanent on the right track.
Electrical panels must be elevation quality and have power socket with regard
to pit pump 22kw
Submersible slurry pump , or Pit pump 22kw x 2units
The thickness of the unit with the track folded cannot be more after that 2 .
5m
Total elevation of the unit 3. 20m – so if volume dimensions are changed please
extend the size of the unit from 7. 5m to more.

Part 2: Exit pit shaker along with small tank:
Shale Shaker 500gpm
Mud Tank dimension 3m x 2 . 5m
Max height with shaker mounted 3. 2m
Move pump to push mud one 35 kg/cm3 to eight hundred distance (30-45kw motor)
Electric panel to operate shaker, move pump and to have electrical power and
operation of leave pit.
Lifting with motorised hoist

Part 3: Spare component list:
Shaker screens x 10pc (same as last offer)
Extra vibrator
Electrical extra buttons x 20pc
Extra cyclone desander
Spare cyclone desilter x 2 personal computer
After we have several e-mail communication and several times adjustments on the
drawing. The client is extremely happy with the commercial suggestion &
technical proposal. GN Solids Control is Tiongkok leading manufacturer for HDD
compact mud system along with other solids control equipment including Shale shaker, mud cleaner system ,
desander, desilter, vacuum degasser,
chemical mixing unit, jet shearing unit, mud agitator, bottom mud gun, transfer
pump, decanter centrifuge, vertical G cuttings dryer, could you contact us freely for any
specifications.