gnadmin | GN Decanter Centrifuge

Two Package Triple Shale Shaker Unit for Indian Client

There is a batch of Shaker Shakers ready for shipment to Indian’s work site for drilling project.

GN Company is a professional manufacturer of Solid/Liquid Separation, Solid/Liquid/Liquid Separation Equipment for 12 years, including Decanter Centrifuge, Disc Separator, Shale Shaker, Desander, Desilter, Mud Cleaner, etc.

2019.10.10 Triple Shale Shaker 1

India is a huge market, with steady sales amount increase, and GN Managing Board pays big attention on developing India market.

GN Company would attend the IFAT 2019 exhibition in Mumbai.

Date: October 16th~18th, 2019.

Address: BOMBAY EXHIBITION CENTER, MUMBAI, India.

Booth No.: D41A, Hall 1

GN Company attends exhibition

We would show products as follow,

Decanter Centrifuge – Solids-liquid separation, solids dewatering, waste water concentrate, Edible oil production, mining tailing dewatering, other industrial separation
Sludge Solid Vacuum Pump – High solid content sludge transfer, oily waste sludge transfer, solid powder transfer, animal waste transfer
Centrifugal Pump – Drilling mud transfer, light slurry transfer

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Drilling Mud Recycling System Ready for Shipment to Domestic Client

There is one set of drilling mud recycling system is under final assembling in GN Company‘s work plant, and would be ready for shipment soon.

This Drilling Mud Recycling System mainly includes equipment as follow,
Shale Shaker,
De-sander,

Pump, Pipeline, Accessories, etc.

The shale shaker is used to remove coarse solids, with size more than 100um.
The Desander is used to remove solids, with size 45~70um.

Working Procedure as below,
Feeding Drilling Mud to Shale Shaker through Mud Logging Tank, solids with size bigger than 100um would be shake out.
The drilling fluid passing through shaker screen would be pumped to Desander by Submersible Slurry Pump, solids with size 45~70um would be shake out.

The client also ordered one set of Jet Mud Mixer, including Mud Hopper, Mud Mixing Pump (centrifugal pump), for mixing the drilling fluid with chemical products, in order to improve its working performance.

GN Company is a professional manufacturer of Solids Control Equipment for 11 years, including Decanter Centrifuge, Shale Shaker, Shaker Screen, Desander/Desilter, Pump, etc.

GN Company supplies about 300 sets of decanter centrifuges in 2018, with 70% for International Market, including UK, Canada, Australia, USA, Russia, China, etc.

GN Company has two factories under operation, and a third one under manufacturing now, with more than 100, 000 square meters totally.

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Supplied Solids Control System for Chinese Client’s Drilling Project

There is one Complete Solids Control System for Drilling Rig is under final assembling in GN’s work plant, and would be shipped to client’s work site soon.

The system includes 4 modules as below,

Two Units of Shale Shaker (removing solids with size more than 100um)
One Unit of De-sander (removing solids with size more than 45~70um)
One Unit of De-silter (removing solids with size more than 20~45um)
One Unit of Decanter Centrifuge (removing solids with size less than 20um)

2019.09.18 Mud Circulation System

Drilling Fluid Solids Control System Working Procedure as below,

The drilling mud firstly pumped to the Mud Gas Separator, if the drilling fluid has Toxic flammable gas, for removing the toxic gas.

Secondly, The drilling mud would be pumped to shale shaker, for removing coarse particle, with size more than 100um.

The liquid and fine solids would pass the shaker screen, and flow into storage tank under the shale shaker.

Thirdly, the drilling fluid would be pumped to Vacuum Degasser, for removing air from drilling fluid, in order to increase separation efficency for equipment after.

Then the drilling fluid would be pumped to Sand Removal Cyclone, for removing solids 45~70um, then Desilting Cyclone, for removing solids 20~45um.

The drilling fluid is clean after treated by Mud Cleaner, and if the project is necessary to remove fine solids, less than 20um, the drilling fluid can be pumped to Decanter Centrifuge for further solid separation.

2019.09.18 Drilling Mud System

Welcome to contact GN Company for more technical specifications & working videos about our equipment in working sites.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Solids Control Will Exhibit at 2019 ADIPEC in ABU DHABI

GN Solids Control would attend ABU DHABI International Petroleum Exhibition & Conference, dated on November 11-14th, 2019, with booth’s No. 10514.

GN Company attends ADIPEC exhibition

GN Solids Control is a professional manufacturer of Solids Control equipment for 11 years, including Decanter Centrifuge, Shale Shaker, Mud Cleaner, Shale Shake Screen, Vertical Cuttings Drier, Centrifugal Pump, etc.

GN Company supplied about 150 sets of decanter centrifuges and 200 sets of shakers in 2018, 70% for International Market, including UK, Netherlands, Canada, USA, Russia, India, China, Kuwait, Oman, UAE, etc.

GN Company has two factories under operation, and a third one under manufacturing now, with more than 100,000 square meters totally.

GN Company has two branch companies in Russia and USA, with decanters & spare parts stocking in warehouse in Houston.

The 2019 ABU DHABI International Petroleum Exhibition & Conference would have more than 145,000 visitors, 2,200 companies attending the exhibition from 59 countries, 28 national oil companies, 155,000 gross sq.

GN plans to show Vacuum Screen Technology, Decanter Centrifuge, Shale Shaker Screen, and Solids Vacuum Pump during the exhibition.

Decanter Centrifuge

Decanter Centrifuge is used for mud dewatering/thickening, and slurry clarification, etc. GN Company can manufacture centrifuge with capability 100Liter/minute-120 m3/hour, and material made of Stainless Steel 2304. Both Explosion & Non-Explosion can be customized.

Sludge Solids Vacuum Pump is widely used for transferring material with high gravity and high density, with solids content up to 80%.

Centrifugal Pump (including spare parts) is 100% interchangeable with reputable brand pump.

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Oil Water Separator Received Big Attention among clients

GN Oil Water Separator can be used to remove free non-emulsified oils, diesel, gasoline and fuels from waste stream by coalescing media. Because of its high capacity and easy operation, oil water separator is popular for primary Oil Water separation project, including groundwater remediation, vehicle wash racks, storm-water treatment, Oil Production and Spill Recovery, etc.

GN Company Oil Water Separator capacity ranges from 6m3/h to 262 m3/h, and the material can be stainless steel and carbon steel.

Oil Water Separator

Working Procedure of GN Oil Water Separator

1) Oil Droplets Coalesce
Waste water feeding into oil water separator and flowing through a tightly stacked bundle of coalescing media. The coalescing media expands the surface area of the oil water separator giving the free oil more space on which to coalesce. As the oil droplets accumulate on the coalesce media and turned into larger droplets. Later on the larger drop flow up the surface of the media, detach and rise to the water surface. Because of the difference gravity of oil water and solids, so they can be separated.

2) Oil Decants to Oil reservoir
Surface oil decants by gravity into a segregated oil reservoir to be removed from the tank.

3) Solids Slide down to sludge chamber
Since the solids gravity is bigger than water, the solids will slide down the surface of the media into the sludge chamber at the bottom of the tank for removal when it’s necessary.

4) Clean water collection
After that, the oil free relatively clean water travels under an oil reservoir baffle, over an adjustable weir and into a clean water effluent chamber which will be discharged from this chamber by gravity.

Welcome to visit GN factories, and do trail test within our work plant.

Welcome to contact GN Sales Managers for technical specifications and offers.

We would attend IFAT Exhibition in Germany, dated on May 4th~8th, 2020, with booth No. 104-b, Hall A1

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying