gnadmin | GN Decanter Centrifuge

GN Company Sludge Solids Vacuum Transfer Pump Received Great Attention among European Clients

Recently Clients from European sent some enquires to GN Company, about consultation for sludge, solids, slurry….. transferring, as they have different project requirement.

GN Sludge Solids Vacuum Transfer Pump is 100% air driven/operation pump, while there is no cost of Electricity or Diesel. Air is always supplied by Air Compressor (GN Company doesn’t manufacture Air Compressor, only Pump. We suggest clients to find air compressor from local market, which can save cost & shipment cost. But we have business partner for manufacturing Air Compressor).

The Pump can be widely used to transfer high density/viscosity sludge, solids (including powder, soil, sand……), slurry, etc.

Please find video about Pump during work from linkage as follow.

https://youtu.be/rvS4EZm8wuo

Horizontally the Pump suction distance is 50meters, while discharge distance is 1000meters. Vertically the Pump suction depth is 8meters, while lift is 80meters. (This is calculated based on clean water, and it would reduce some during actual operation)

GN Company pays big attention on European Market, and issue exclusive agreement for Portugal Company as our business partner for Portugal & Spain Market.

And GN Company already supplied Pump to UK, Norway, Greece, Portugal, Spain, and Russia.

GN Company Technical Team has developed 3 models this Pump, with different capacities, including 10, 20, 40m3/hour. (This is also calculated based on clean water, and it might reduce some during actual operation)

It’s acceptable to arrange Trial Test with Clients’ sample by GN Pump within GN work plant.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Sludge Solids Transfer Pump Received Great Attention among Middle East Clients

Recently GN Company’s Sludge Solids Transfer Pump received enquiries from different countries in Middle East for different projects.

The Pump can be used to transfer Sand, Soil, Slurry, etc., and maximum size of solid can be transferred by our Pump is 75mm.

The Pump horizontal suction distance is 50meters, and discharge distance is 500/1000meters for different models. And vertical suction depth is 8meters, while lift is 80meters. (All these figures are calculated based on clean water, and it might reduce some during actual operation for different clients’ projects).

The Pump is 100% air operation/driven, while there is no cost of electricity or diesel. The Air is always supplied by Air Compressor. GN Company does not manufacture Air Compressor, and we suggest clients to find from local market.

Please contact GN Sales Managers for the detailed specifications of Air Demand for pump.

The Pump Material is made of carbon steel, while stainless steel 304/ 316 can be customized.

GN Factories are only 1 hour from the Beijing International Airport, and 2 hours from the Tianjin Seaport by car. It’s convenient to handle shipment both by Air and Sea.

We already supplied Pump to UK, Norway, Russia, Greece, Portugal, India, Malaysia, Thailand, Nigeria, Mongolia, UAE, Oman, and Bahrain.

It’s acceptable to arrange Trial Test with Clients’ sample with our Pump, within GN work plants, to check and find out the Real Performance about the Pump.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Company Supplied Screw Conveyor and Centrifugal Pump for Russian Client

Recently GN Company has completed production of a batch of Screw Conveyors and Centrifugal Pumps, and plan to arrange shipment to Russian Client soon.

Company is a professional manufacturer of Separation & Conveying Equipment for 13 years, and our Equipment includes as follow,
2/3 Phase Decanter Centrifuge
2/3 Phase Disc Separator
Oil Water Separator
Screw Conveyor
Screw Pump
Centrifugal Pump
Sludge Solids Transfer Pump, etc.

For Screw Conveyor,
GN Company now has two kinds of models, including U-Type Screw Conveyor and Tube-Type Screw Conveyor.
U-Type Screw Conveyor can be used for moving wet or dry material, either horizontally or vertically. Tube-Type Screw Conveyor can be used for conveying powder and granular material on incline or vertically (normally the feeding material is less than 5mm).

For Centrifugal Pump,
The Pump can be used to transfer mud slurry, wastewater (the solids less than 2mm) in Oil & Gas Drilling, Environmental Waste, Mining, Construction, etc. The Pump Material can be customize, to make it suitable for working in high volume, high temperature, and high corrosion situation.
And GN Pump is 100% interchangeable with International Reputable Brand.

Besides supplying single equipment, GN Company takes more advantages of delivering customized One Stop Turnkey Solution for your project, including Design & Manufacturing. And GN Company Technical Team can design & manufacture the whole system in Containerization or Skid, which is more safety, and easier for transportation by truck, and movable around different job sites.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co., Ltd
Tel:+86-316-5276988/9 Fax: +86-315-5276990
Mob (WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Supplied Polymer Dosing System for African Client

GN Company delivered one set of Polymer Dosing System for client from Africa, which is used to help Centrifuge to get better performance during dewatering. Because during sludge dewatering process, the ultrafine solids (less than 2um) cannot be separated by Centrifuge directly.

The Polymer Dosing System is help to gather the fine solids together, and form flocculent, which is easier to be by separated by Decanter.

Please find video about from linkage as follow,
https://www.gnseparation.com/video/gn-tbm-mud-dewatering-decanter-centrifuge-video

Besides automatic PAM Polymer Dosing Unit, GN Company can also supply single barrel type chemical solution preparation unit.

GN Company is a professional manufacturer of Separation & Conveying System for 13 years, including Decanter Centrifuge, Disc Separator, Oil Water Separator, Polymer Dosing System, Screw Conveyor, Sludge Solids Transfer Pump, etc.

Here are two Advantages about GN Company as follow,

1. Besides supplying single unit of Equipment,
GN Company takes more advantages of delivering customized One Stop Turnkey Solution for your project, including Design & Manufacturing.
Our Main Equipment is Centrifuge, and we also manufacture related accessories, including Shaker, Pump, Screw Conveyor, Chemical Dosing Unit, Slurry Tank, etc.
2. GN Company can design & manufacture the whole system in Containerization or Skid, it is safety, and easier for transportation by truck, and movable around different job sites.

Welcome to contact GN Company Sales Managers, and they would send professional solution for your project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob (WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Constant Torque self-adaptation Function for Decanter Centrifuge

GN Company is a professional manufacturer of Decanter Centrifuge, with capability of manufacturing Centrifuge with bowl diameter of 220mm~760mm, capacity of from 1~2m3/hour to 120m3/hour. GN Technical Team is a very professional team, with experience of R&D for more than 10 years.

Here are introduction about Constant Torque self-adaptation Function for GN Decanter Centrifuge.

When concentration changes, the current of back motor (for driving screw) would fluctuate accordingly.

1. When the monitored current value of back motor exceeds set value, the differential speed of centrifuge is too low, the control-programming program automatically controls the back motor working current to decrease to the preset value, and increases the differential speed of centrifuge.

2. When the monitored current value of back motor returns to normal setting value range, the control-programming program automatically controls the auxiliary motor working current to return to the preset value, and the differential speed of centrifuge returns to the normal.

3. When the monitored current value of back motor is low to the set value, the differential speed of centrifuge is too high, the control-programming program automatically controls working current of back motor to rise to the preset value, and reduces the differential speed of centrifuge.

4. Constant Torque self-adaptation Function can ensure the uniform of dry humidity of sludge (discharged from Centrifuge), and avoid the plugging problem caused by concentration change of feeding sludge, which provides reliable guarantee for the normal and stable operation of centrifuge.

Welcome to contact GN Sales Manager for more specifications.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying