作者： gnadmin

Solids Vacuum Pump for Transferring Dry Sand

Client from Europe ordered one unit of Solids Vacuum Pump from GN Company, and the Pump would be used to transfer dry sand in his construction job site.

GN Company has developed 3 models of Vacuum Pump, with different capacities, including 10, 20, 40 m3 per hour. The Pump can be used to transfer solids with size maximum 50mm, based on its inlet/outlet size. The suction distance can reach 50 meters in horizontal, and suction depth can reach 8 meters. The discharge distance can be 1000 meters maximum in horizontal, and lift/discharge height can reach 80 meters maximum. (This is calculated based on clean water, and it might reduce some during actual work)

Two of the small models of Vacuum Pump are movable with wheel, and the biggest model is skid-mounted.

Vacuum Pump is totally 100% air operation/driven, and itself not cost of electricity or diesel. The air is always supplied by air compressor. Air Compressor can be electrical driven or diesel driven. And the pump is much less maintenance than common pump, and clients find hoses easily in local hardware store.

It is available to arrange pump trial test with clients’ sample within GN factories, and clients can check the pump performance during actual operation.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ requirement.

Here are the applications of the Vacuum Pump can work on
Slurry, Sludge removal and transfer
Mud and tailings transfer
Pit and Sump cleaning
Oil sludge, tank bottoms residual removal and transfer
Barge tank and silo transfer of material
Sand; course, fine, conventioal and frac sand
Diatomaceous earth
Hazardous waste removal with close circuit transfer
Animal waste
Transfers virtually any material

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

Sludge Vacuum Pump for European Client

Client from Africa ordered one unit of Sludge Vacuum Pump, and the Pump would be used for oily sludge cleaning in the crude oil production site.

GN Company is professional manufacturer of Vacuum Pump, and the Pump can be widely used to transfer sludge, soil, sand, powder, slurry, mud, water, etc.

Please find the pump working video from linkage as below.

https://www.youtube.com/watch?v=OuUWPKmtVr0

GN Company Technical Team now has developed 3 models of Vacuum Pump, with different capacities, including 10m3 per hour, 20m3 per hour, and 40m3 per hour (the capacity is calculated based on clean water, and it might reduce some during actual work for clients’ project). The maximum suction distance can reach 500 meters in horizontal, and suction depth can be 8 meters. The maximum discharge distance can reach 1000meters in horizontal, and discharge height can reach 80 meters.

The pump is 100% air driven, and itself no need electricity or diesel, therefore without concern about explosion proof in dangerous environment, such as refinery plant.

The Vacuum of the Pump is created by the principle of venture, and air is always supplied Air Compressor. GN Company focus on manufacturing vacuum pump only, and we can also supply Air Compressor based on clients’ project requirement, thus we can deliver a whole package. Generally we suggest clients to find air compressor in local market, and that can save their purchase cost and shipment cost as well.

Welcome to contact GN Sales Managers, and they would detail solution based on clients’ requirement.

It is also acceptable to arrange trial test with clients’ sample by GN Vacuum Pump within GN Company’s factories, and clients can check the pump performance during actual operation.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company completed production of one set of Sludge Dewatering Screw Press, and planned to ship to the European client recently. The screw press would be used for sludge dewatering of municipal sewage.
Besides Decanter Centrifuge and Filter Press, Screw Press is newly developed equipment for sludge dewatering in wastewater treatment. And it has obvious advantages of low investment, low energy cost and low operation cost. It achieves dewatering function by principle of screw extrusion, through the strong squeezing force, which is generated from the change of screw diameter and screw pitch, and the tiny gap between floating ring and fixed ring.

GN Company now is capable to manufacture Screw Press with diameter 100mm, 130mm, 200mm … 400mm, with capacity ranging from 0.28m3 per hour to 130m3 per hour. The part contact with material is always made of stainless steel 304, 316, while duplex stainless steel 2205 can also be customized based on clients’ project requirement. For example, if the sludge has high content of Chloride, common ss304 or 316 cannot work well. The Motor for screw is reputable supplier from Japan, and the electrical components are from reputable European brands.

The Screw Press has self-cleaning function, and is not easy to get blockage, and has long service working hours.

Besides supplying dewatering equipment, GN Company is also capable to supply the other supporting equipment, including Sludge Feeding Pump (progressive cavity type), Polymer Preparation Unit with Dosing Pump, Screw Conveyor, Tank, etc.

Welcome to contact GN Sales Managers, and they would offer professional One Stop Turnkey Solution for clients’ projects.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN 3 Phase DECANTER CENTRIFUGE SHIPPED TO MIDDLE EAST FOR OILY WASTEWATER TREATMENT

GN Company completed production of one set of 3-phase Decanter Centrifuge with VFD control panel, and shipped to Middle East client’s job site, and it would be used for oily wastewater treatment. GN Company is a professional manufacturer of Decanter Centrifuge and Disc Separator. And Decanter Centrifuge includes 2-phase Decanter Centrifuge and 3-phase Decanter Centrifuge. 3-phase Decanter Centrifuge can be widely used for solids, heavy phase, and light phase separation (solids-oil-water).

GN 3 phase decanter centrifuge adopts the design of installation of Main Motor and Back Motor at the same side of Decanter, and the connection between motor and Bowl/Screw is V belt. The two motors are installed horizontally, and that brings much more convenience for maintenance. Considering the abrasion from the solids content in the wastewater, GN Technical Team designs tungsten carbide plates, in order to protect the screw blades, which would greatly increase working hours of Decanter, and reduce maintenance cost. The solids discharge port is also protected by wear-resistance bushing.

The components in the GN Electrical Control Cabinet are all from international reputable brand, including VFD, PLC, Touch Screen, and the other small components. And if it is necessary, GN Company can also supply explosion proof standard motor and control cabinet. Both ATEX and IEC are available.
Besides supplying single unit of equipment, GN Company is also capable to supply Sludge Feeding Pump, Polymer Preparation Unit, Screw Conveyor, etc.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ project requirement.

Best & Regards,

Kevin Liu
Regional Manager
GN Separation & Conveying
Hebei GN Separation & Conveying Equipment Co., Ltd

Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com
GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company’s Decanter Centrifuge Received Great Attention from European Clients

GN Company is a professional manufacturer of Decanter Centrifuge from China mainland, with all three factories in China Mainland, and 2 branches in Moscow and Houston separately.

Decanter Centrifuge is one of the main equipment used for sludge dewatering in the wastewater treatment industry. And discharged cake has moisture about 70~75%, which is acceptable for most of job sites discharge requirement. Generally Flocculent can help Decanter Centrifuge to get better dewatering performance. (Decanter Centrifuge is only used to reduce the sludge volume, while there is not any chemical reaction during the dewatering process)

There are 3 VFDs in the control cabinet of GN Decanter Centrifuge’s, which is used for control of Main Motor, Back-up Motor, and Feeding Pump. GN Technical Team can supply both Non Explosion proof Panel and Explosion proof panel, and can reach the requirement of ATEX and IEC standard.

GN Company had already supplied Decanter Centrifuge to USA, Canada, Brazil, Argentina, UK, Russia, Germany, Poland, Nigeria, Egypt, Algeria, UAE, Oman, India, Singapore, Malaysia, etc. And GN Company can offer local service support in Europe and Africa.

GN Company would supply product quality with 18 months after commission and 24 months after factory shipment whichever coming firstly. And GN Company can also send out engineers to clients’ job sites based on their requirement.

GN Company is also capable to manufacture related supporting equipment, including Polymer Preparation Unit, Sludge Feeding Pump, Screw Conveyor, etc.

Welcome to contact GN Sales Managers, and we would offer One Stop Turnkey Solution based on clients’ specific requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co., Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)