作者： gnadmin

Decanter Centrifuge Manufacturer in China

Compared with other separation machines, centrifuges can not only obtain solid phase with low moisture content and high-purity liquid phase, but also have the advantages of small size, good sealing, continuous operation, automatic remote control, etc., so they are widely used in chemical industry, Petrochemical, petroleum refining, light industry, medicine, food, textile, metallurgy, coal, mineral processing, shipbuilding, environmental protection, military and other departments, such as the recovery of pulverized coal for wet coal mining; the purification and reuse of drilling mud for oil mining; uranium Concentration of isotopes; sludge concentration and dehydration of sewage treatment; refining of petrochemical products; extraction of antibiotics and pesticides; manufacture of milk, yeast, beer, fruit juice, sugar, orange oil, animal and vegetable oil, rice bran oil, starch and other foods; The dehydration of fabric fibers; the purification of lubricating oil and fuel oil need to use centrifuges. It can be seen that the centrifuge has become widely used separation equipment in various sectors of the national economy.

The application functions of the centrifuge mainly include: dehydration, clarification, concentration, classification, separation and so on. Different centrifuge models must be selected according to different material characteristics and separation requirements, which leads to the problem of centrifuge selection. In the actual production process, due to the selection of suitable separation equipment for some projects, the process is simple, the energy consumption is reduced, the product quality is improved, and good economic benefits are obtained; but there is also improper selection of centrifuges, which makes the production process unable to proceed normally. , resulting in greater economic losses. Therefore, in the engineering design and technical transformation, the problem of how to correctly select the centrifuge has been recognized and valued by the majority of engineering and technical personnel.

Welcome to contact GN Sales Manager.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company’s Decanter Centrifuge for Wastewater Treatment

GN Company has been focus on manufacturing Decanter Centrifuge for about 10 years. Now it has three factories in China Mainland, and two subsidiaries outside China, one is in the USA, and the other one in Russia.

GN Technical Engineers have rich experience on research and develop the centrifuge technology, and here are some of their experience about analysis and elimination of abnormal problems.

1. The separation liquid is turbid, and the solid recovery rate is reduced. The reasons and solutions are as follows:
(1) If the thickness of the liquid ring layer is too thin, the thickness should be increased.
(2) The amount of mud entering is too large, and the amount of mud entering should be reduced.
(3) The speed difference is too large, and the speed difference should be reduced.
(4) The inflow solids are overloaded, and the amount of mud entering should be reduced.
(5) The screw conveyor is seriously worn and should be replaced.
(6) The rotating speed of the drum is too low, and the rotating speed should be increased.

2. The solid content of the mud cake decreases. The reasons and solutions are as follows:
(1) The speed difference is too large, and the speed difference should be reduced.
(2) The thickness of the liquid ring layer is too large, and its thickness should be reduced.
(3) The rotating speed of the drum is too low, and the rotating speed should be increased.
(4) The amount of mud entering is too large, and the amount of mud entering should be reduced.
(5) The dosage of dry sludge should be reduced if the dosage of conditioning and tempering is excessive.

Welcome to contact GN Sales Managers, and they would offer one stop turkey solution based on clients’ requirement.

Control of the Thickness of the Liquid Ring Layer of Decanter Centrifuge

GN Company is manufacturer of Decanter Centrifuge from China Mainland, and has capability of manufacturing decanter centrifuge with bowl size 220mm, 360mm, 450mm, 550mm, 650mm, and 760mm.

GN Technical Team has about 10 years’ experience on decanter centrifuge and has continuously improved GN product. Here is some experience shared by GN Technical Team. When the amount of sludge is constant, the thicker the liquid ring layer, the longer the sludge is separated in the liquid ring layer, and the more sludge will be separated. On the other hand, the thickening of the liquid ring layer reduces the possibility of some disturbed small particles being lost with the separation liquid.

Combining the above two aspects, the thickening of the liquid ring layer generally improves the solid recovery rate of dehydration.

However, the thickening of the liquid ring layer will correspondingly shorten the drying area, so that the sludge separated from the liquid ring layer will not have sufficient time to be “dried”, so the solid content of the mud cake will decrease.

When controlling the thickness of the liquid ring layer, a trade-off should be made between the high solids recovery rate and the solids content of the mud cake. Unless the dewatered sludge needs to be incinerated, in general, there is no need to pursue an excessively high solid content in the mud cake, and the higher the solid recovery rate, the better, so the thickness of the liquid ring layer should be increased as much as possible.

Welcome to contact GN Sales Managers and they would supply one stop turnkey solution based on clients’ project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company Supplied Decanter Centrifuge for African Client

GN Company has been a professional manufacturer of Decanter Centrifuge for about 10 years, and now has capability to manufacture Decanter with bowl size from 220mm~760mm, and treatment capacity 1 m3 per hour to 120 m3 per hour.

The decanter centrifuge is a spiral unloading sedimentation centrifuge. It is mainly composed of a high-speed rotating drum, a screw conveyor with a hollow shaft and a differential with the same rotation as the rotating drum and a slightly lower speed than the rotating drum. When the suspension to be separated is sent into the drum by the hollow shaft, it is immediately thrown into the drum cavity under the action of the centrifugal force generated by the high-speed rotation.

The high-speed rotating drum generates strong centrifugal force to sling the solid particles with higher density than the liquid phase on the inner wall of the drum to form a solid layer (because of the ring shape, called the solid ring layer); due to the low density of water, the centrifugal force is small Therefore, the liquid layer can only be formed inside the solid ring layer, which is called the liquid ring layer.

Due to the different rotation speeds of the screw and the drum, there is a relative movement (that is, the difference in rotation speed) between the two. The relative movement of the screw and the drum is used to slowly push the sludge in the solid ring layer to the cone end of the drum and pass through the drying zone. After that, it is continuously discharged from the outlets distributed around the circumference of the drum; the liquid in the liquid ring layer is continuously discharged from the weir to the outside of the drum by gravity to form a separated liquid.

Best & Regards,

Kevin Li

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company Supplied Decanter Centrifuge for African Client

GN Company is a professional manufacturer of Decanter Centrifuge, and is capable to supply decanter with bowl diameter from 220mm to 760mm.

The decanter centrifuge is a spiral unloading sedimentation centrifuge. It is mainly composed of a high-speed rotating drum, a screw conveyor with a hollow shaft and a differential with the same rotation as the rotating drum and a slightly lower speed than the rotating drum.

When the suspension to be separated is sent into the drum by the hollow shaft, it is immediately thrown into the drum cavity under the action of the centrifugal force generated by the high-speed rotation.

The high-speed rotating drum generates strong centrifugal force to sling the solid particles with higher density than the liquid phase on the inner wall of the drum to form a solid layer (because of the ring shape, called the solid ring layer); due to the low density of water, the centrifugal force is small Therefore, the liquid layer can only be formed inside the solid ring layer, which is called the liquid ring layer.

Due to the different rotation speeds of the screw and the drum, there is a relative movement (that is, the difference in rotation speed) between the two. The relative movement of the screw and the drum is used to slowly push the sludge in the solid ring layer to the cone end of the drum and pass through the drying zone. After that, it is continuously discharged from the outlets distributed around the circumference of the drum; the liquid in the liquid ring layer is continuously discharged from the weir to the outside of the drum by gravity to form a separated liquid.

Welcome to contact GN Company, and they would offer one stop turnkey solution for clients’ project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)