GN dewatering decanter centrifuge is T series decanter centrifuge with beach angle of 8.5 degrees. T series decanter centrifuge is generally used dewatering and thickening purpose.
The feed enters the bowl through a stationary inlet tube and is accelerated smoothly by an inlet distributor. The centrifugal force that results from the rotation then causes sedmentationof the solids on the wall of the bowl.
Separation takes place in a horizontal cylindrical bowl equipped with a screw conveyor.
The conveyor rotates in the same(adverse) direction as the bowl, but slightly slower(faster), thus moving the solids towards the concial end of the bowl. The cake leaves the bowl through the solids discharge openings into casting.
The separation process runs through the bowl entire cylindrical section, clarified liquid is separated by adjustable overflow plate.
T SERIES DEWATERING DECANTER CENTRIFUGE SPECIFICATION
| Model | GNLW-224ET | GNLW-364ET | GNLW-454ET | GNLW-554ET | GNLW_654ET | GNLW-764ET | |
| Bowl Diameter | 220 mm (9 Inch) |
360 mm (14 Inch) |
450 mm (18 Inch) |
550 mm (22 Inch) |
650 mm (25.6 Inch) |
760 mm (30 Inch) |
|
| Bowl Length | 924 mm (36.4 Inch) |
1512 mm (59.5 Inch) |
1890 mm (74.5 Inch) |
2310 mm (91 Inch) |
2730 mm (82 Inch) |
3328 mm (131 Inch) |
|
| Bowl Speed | 4500 RPM | 3900 RPM | 3500 RPM | 3150 RPM | 2900 RPM | 2650 RPM | |
| Max G Force | 2492 G | 3063 G | 3084 G | 3051 G | 3058 G | 3000 G | |
| L/D Ration | 4.2 | 4.2 | 4.2 | 4.2 | 4.2 | 4.4 | |
| Main Motor | 11 KW | 22/30/37 KW | 37/45/55 KW | 55/90 KW | 90/110 KW | 110/132/160 KW | |
| Back Motor | 5.5 KW | 7.5/11 KW | 11/15/22 KW | 15/37/45 KW | 18.5/22/37/55 KW | 22/37/75/90 KW | |
| Beach Angle | 8.5° | ||||||
| Drive Type | VFD+PLC+ HMI | ||||||
| Bowl Material | SUS2304(Duplex Stainless Steel)/ SUS2205(Duplex Stainless Steel) Centrifugal Casting | ||||||
| Screw Material | SUS2304(Duplex Stainless Steel)/SUS2205(Duplex Stainless Steel) | ||||||
| Remarks |
|
||||||
| The above specification and parameters for reference only. | |||||||
For more information, please feel free to contact GN.