6 月, 2020 | GN Decanter Centrifuge

GN Company Report about Comparison of Centrifuge and Filter Press

Regarding to the Clients’ questions about the Comparison of Decanter Centrifuge and Filter Press, GN Company Technical Team had research and prepared report, details as follow.

1. Discharged Cake Moisture
1.1 Decanter Centrifuge
Decanter centrifuge is using centrifugal force to separate solid and liquid under normal pressure, thus the discharged solid cake with relative high moisture, about 50~80%.
1.2 Filter Press
Filter press is dewatering the sludge by high pressure extrusion and filtering, discharged solid cake would be dryer than same out of decanter centrifuge, about 45~75%.

2. Applicability
2.1 Decanter Centrifuge
Decanter centrifuge can be widely used for sludge with low viscosity sludge, and high viscosity such as the oily sludge.
2.2 Filter Press
Filter press normally will not be used for oily sludge dewatering due to the filter membrane blocking issue.

Clients shall consider factory situation, labor cost, working condition, sludge type, plant area, investment and so on to decide to use filter press or decanter centrifuge.

GN Company is a professional manufacturer of Decanter Centrifuge for 13 years, with bowl diameter of 220~760mm, and capacity of 1 ~120 m3/hour.

Welcome to contact GN Sales Managers, they would send the best solution based on your project requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Supplied Solids Transferring Pump for Middle East Client

Client from Middle East ordered one unit of Solids Transferring Pump for suction grit (dry sand), which is used for blasting.

GN Solids Vacuum Pump can be widely used for transfer Sludge, Solid (such as carbon, soil, powder, etc.), Slurry, etc.

Please find video about the Pump during work from Linkage as follow.

https://www.youtube.com/watch?v=OuUWPKmtVr0

One of the Biggest Advantages is that the Pump is 100% air driven/operation, while there is no cost of electricity or diesel. So the Pump can work in dangerous environment, such as Petroleum Site, Refinery Plant, without worrying about explosion.

GN Company has developed 3 models of this Pump, with 3 different capacities, including 10, 20, 40m3/hour (Note, the Capacity is calculated based on clean water, it might reduce some during actual operation).

The Air Requirement for each model is different, hereby taking 20m3/hour model as an example, its Pressure Requirement is 550~690Kpa (80~100PSI), and Air Demand is 80m3/minute (280CFM).

Our Company already supplied this Pump to UK, Norway, Russia, Portugal, Greece, Kazakhstan, India, Nigeria, Mongolia, Malaysia, etc.

It’s acceptable to arrange trial test with clients’ sample with GN Pump, for making sure that the Pump can work for your project.

Welcome to contact GN Sales Managers for detailed specifications.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob (WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Offers One Stop Turnkey Solution for European Oil Sludge Treatment Project

Recently Clients from Europe consulted with GN Sales Managers for solution about Oil Sludge Treatment, mainly is for petroleum oil sludge. The Clients would like to recover clean oil from sludge, while discharge solids and water suitable for environment.

GN Company has developed Oil Sludge Treatment System, which can be widely used for Crude Oil Tank Sludge, Refinery Plant Waste Oil Sludge, and Drilling Waste Oil Sludge, etc.

The System is to add chemical (flocculants & emulsifier) into sludge, while heating the sludge to 60~70 C degree, then pumped the sludge into GN System for 3 Phase Separation (Oil Water Solids). The recycled water can be reused in the washing system, the oil can be sold to Refinery Company, and the solids, with oil content less than 2%, can be sent for biodegradation or thermal unit for final disposal.

Please find video about the System during operation from linkage as follow.
https://www.youtube.com/watch?v=hXrzm5J_k1A

There are two Big Advantages about GN Company as follow,

1. Besides supplying single unit of Centrifuge/Separator, GN Company takes more advantages of delivering customized One Stop Turnkey Solution for your project, including Design & Manufacturing. GN Company can also manufacture the related accessories, including Pump, Screw Conveyor, Chemical Dosing Unit, Slurry Tank, etc.

2. GN Company manages to design & manufacture the whole system on Skid or Containerization, which is easier for transportation by truck, and movable around different job sites.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob (WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Offers Disc Centrifuge for European Client

Recently GN Company supplied one unit of 2 Phase Disc Stack Separator for European Client’s Beverage Plant. The Separator is used for clarifying the liquid, removing the yeast after fermentation.

Disc Separator is specially used for two and three phase separation. Two-Phase Separation is to separate the suspended solid from liquid, or separate two kinds of liquid but different specific gravity and also are immiscible. Three-Phase Separator is to separate two kinds of immiscible liquid and solid at the same time.

Here is a brief introduction about the Working Principle of Disc Separator:

After Material feeding into the heart parts of Separator (the inside of Bowl), because of strong Centrifugal Force, the Material Mixture passes through the interval of a group of disc pieces bundles, the heavy phase moves outward the neutral hole along the disc pieces, among which, the sludge accumulate in sediment area, while heavy phase flows to Big Centripetal Pump, and light phase moves to small centripetal pump, then discharged respectively.

GN Company is professional manufacturer of Centrifuge for 13 years, including 2/3 Phase Decanter Centrifuge, 2/3 Phase Disc Separator. Now GN Company has supplied equipment to more than 70 countries, including UK, Canada, USA, Australia, Russia, UAE, Saudi Arabia, Brazil, Argentina, India,

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN De-watering Decanter Centrifuge Received Great Attention among European Clients

Decanter Centrifuge is widely used for solid liquid separation, sludge/mud dewatering and thickening, different kinds of slurry clarifying, solids separation according to different densities, etc. And its application includes Environmental & Wastewater Industry, Construction Industry, Mining Industry, Chemistry & Pharma Industry, Food & Beverage Industry, Biofuel Industry, Oil & Gas Industry, etc.

GN Company focuses on manufacturing Centrifuge & Separator for 13 years. 70% of GN Company’s Sales Amount is from the International Market, including UK, Netherlands, Canada, USA, Middle East Countries, Russia, India, China, Australia, Brazil, etc.

GN Company now is capable to design and manufacture centrifuge with bowl diameter 220~760mm, with capacities ranging from 1~2m3/hour-120m3/hour, and G Centrifuge force 2000~4000G.

And GN Company has professional After-Sale Service Team to offer installation and commissioning service in clients’ job sites, including inside and outside China Mainland.

GN Company has two factories under operation, and has been building a third one now, with more than 100,000 square meters totally.

GN Company has two branch companies in Russia and USA, with equipment & spare parts stocking in warehouse in Houston.

Welcome to visit our factories and it’s acceptable to arrange Trial Test with Clients’ sample by GN Centrifuge.

It’s always welcome to talk with GN Sales Managers, and they would send the best solution based on Clients’ requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying