月度归档： 2018 年 2 月

2 units of drilling cuttings transfer vacuum pump to South America

This week GN solids control shipped 2 units of drilling cuttings transfer vacuum pump to Argentina, this is used together with 2 sets of drilling waste management system shipped in May, 2017. The client also bought 4 sets of cuttings screw conveyor to transfer the drilling cuttings.


Both of the cuttings vacuum pump and screw conveyor can be used to transfer the drilling cuttings to the vertical cutting dryer, also called vertical G dryer. The discharged solids from vertical cuttings dryer with OOC < 5%, the discharged fluids are transferred to the decanter centrifuge by screw pump. The vertical cuttings dryer and decanter centrifuge are the major equipments for drilling waste management system.
How to install the vacuum pump in the jobsite besides the vertical cuttings dryer?
The vacuum pump can replace the screw conveyor when the fluids content is higher in the drilling cuttings, GN will provide chargable material collection hopper to install on the top inlet of the vertical cuttings dryer. The vacuum pump will suck the drilling cuttings/ oil sludge from the waste pit with hose, the discharge line is also connect with the vertical cuttings dryer inlet top.
When the solids content is higher in the drilling cuttings, the client will use 2 sets of screw conveyor, one set is installed horizontally to collect the drilling cuttings from the solids control system, the other set is installed inslantly with less than 45 degree angle from the underground. The 2nd screw conveyor will transfer the drilling cuttings to vertical G dryer. Pls check the working video of the vacuum pump to transfer drilling cuttings or oil sludge from GN solids control wedsite.
http://www.gnsolidscontrol.com/video/gn-drilling-cuttings-or-sludge-vacuum-transfer-pump-working-video
继续阅读“2 units of drilling cuttings transfer vacuum pump to South America”

Happy 2018 Chinese New Year—from GN solids control

GN solids control wish you and your families happy 2018 Chinese New Year, our holiday starts from Feb. 12th, 2018 to Feb. 25th, 2018, we will back to work on Feb. 26th, welcome to send us your inquiries during the holiday, our sales engineer will response at the earliest convenience. We appreciate your support during the past years, and we wish a longer term cooperation in the year of 2018.
The workers will stop working during the holiday and enjoy their time with families, but our sales will still hard working during the holiday to provide you immediate response.
During the past years, the best sold products are as below:


1) Shaker screens: The composite material frame shaker screens are very popular among international drilling companies in the world in the past years, we almost sold all the stocks and even can not meet the requirement of our clients. Especially for the OEM shaker screens for GNZS703, GNZS594E shale shaker, replacement shaker screens for Swaco Mongoose PT, Brandt King Cobra shaker, Venom, VSM 300 scalping shaker screens and primary shaker screens, FSI, MD-3, etc. screens.
2) Linear motion shale shaker and high G drying shaker: GN brand shale shaker has been widely used for oil & gas drilling solids control system, HDD & CBM mud recycling system, water based drilling waste management system.


3) Decanter centrifuge: GN 14inch bowl , 18 inch bowl, 22 inch bowl decanter centrifuge has been used for oil sludge treatment system, drilling waste management system, dewatering unit, solids control system, etc.
继续阅读“Happy 2018 Chinese New Year—from GN solids control”

400BBL Mud Tank System for Australia Drilling Company

This week GN Solids Control shipped 400bbl mud tank system to Australia drilling company. The configuration of the 400bbl mud tank system is as below:

1) 2 mud tanks, dimension: 12000x2800x1500mm, each tank with 200bbl tank volume, the stairs are outside of the mud tank to promise the largest tank volume.
Mud agitators are installed on top of the mud tank to prevent solids sedimentation.

2) 2 units of GNZS703F-HB linear motion shale shaker, installed with GN OEM composite material frame shaker screens, which is durable longer working life and larger effective screens area for better separation performance, the screens are with GN unique design locking system and the composite material frame make it stocked for over 5 years without getting rusted.
Normally we will package the shaker screens and wedges separately and bond on the shale shaker to avoid it get rusted during sea transportation.

3) Single skid amounted jet mud mixer and connect with the 2 mud tanks, it can mix the drilling fluids from any compartment of the 2 mud tanks except for the sand trap. Oilfield skid mounted design to promise the largest tank volume and easy maintenance. Separate control panel are installed on the skid to control the mixing pump.
4) All of the above equipments are IEC ex and the electrical cable, control panel, glands, etc comply with Australia explosion proof standard.

继续阅读“400BBL Mud Tank System for Australia Drilling Company”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.


GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.
GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


继续阅读“Meet Good manufacturer of decanter centrifuge at CIPPE 2018”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.
GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.


GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


继续阅读“Meet Good manufacturer of decanter centrifuge at CIPPE 2018”